Description
In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
__htab_map_lookup_and_delete_batch() has no rescheduling point. The
batch count bounds how many entries are copied out, not how many
buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the
map end to end. The empty-bucket fast path is worse: it stays inside
a single rcu_read_lock() / bpf_disable_instrumentation() section for
any run of consecutive empty buckets.
That holds up on small maps, but it falls apart at scale. On a
144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic
BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216
buckets held a CPU inside the batch op for 77+ seconds and triggered
the soft lockup watchdog.
Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this
same problem in the generic batch ops, but not in this htab-native path,
which every htab-based hash map variant uses for its lookup[_and_delete]
batch ops.
Complete that fix here. Leave the critical section after 64 consecutive
empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved
bucket cursor. No locks are held at that point, and resuming from the
cursor is already the function's behavior for non-empty buckets. Add the
same call to the per-bucket loop after copy_to_user(), where every lock
has been dropped. cond_resched_rcu() is not enough here: sleeping with
bpf_prog_active elevated makes tracing programs on that CPU silently
skip their invocations.
Plain cond_resched() is not enough either. It is a no-op under PREEMPT
and PREEMPT_LAZY, the only models arm64 and x86 have offered since
commit 7dadeaa6e851 ("sched: Further restrict the preemption modes").
It is also never a Tasks RCU quiescent state, in any model: the
reschedule counts as a preemption. The walking task stays a holdout and
stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline
teardown included, until the syscall returns [1].
cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports
the quiescent state at each yield and still reschedules as
cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels.
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
__htab_map_lookup_and_delete_batch() has no rescheduling point. The
batch count bounds how many entries are copied out, not how many
buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the
map end to end. The empty-bucket fast path is worse: it stays inside
a single rcu_read_lock() / bpf_disable_instrumentation() section for
any run of consecutive empty buckets.
That holds up on small maps, but it falls apart at scale. On a
144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic
BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216
buckets held a CPU inside the batch op for 77+ seconds and triggered
the soft lockup watchdog.
Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this
same problem in the generic batch ops, but not in this htab-native path,
which every htab-based hash map variant uses for its lookup[_and_delete]
batch ops.
Complete that fix here. Leave the critical section after 64 consecutive
empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved
bucket cursor. No locks are held at that point, and resuming from the
cursor is already the function's behavior for non-empty buckets. Add the
same call to the per-bucket loop after copy_to_user(), where every lock
has been dropped. cond_resched_rcu() is not enough here: sleeping with
bpf_prog_active elevated makes tracing programs on that CPU silently
skip their invocations.
Plain cond_resched() is not enough either. It is a no-op under PREEMPT
and PREEMPT_LAZY, the only models arm64 and x86 have offered since
commit 7dadeaa6e851 ("sched: Further restrict the preemption modes").
It is also never a Tasks RCU quiescent state, in any model: the
reschedule counts as a preemption. The walking task stays a holdout and
stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline
teardown included, until the syscall returns [1].
cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports
the quiescent state at each yield and still reschedules as
cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels.
Published:
2026-10-18
Score:
n/a
EPSS:
n/a
KEV:
No
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
||||||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data available yet.
Remediation
No solution or workaround provided in the CVE record.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Sun, 18 Oct 2026 15:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() __htab_map_lookup_and_delete_batch() has no rescheduling point. The batch count bounds how many entries are copied out, not how many buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the map end to end. The empty-bucket fast path is worse: it stays inside a single rcu_read_lock() / bpf_disable_instrumentation() section for any run of consecutive empty buckets. That holds up on small maps, but it falls apart at scale. On a 144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216 buckets held a CPU inside the batch op for 77+ seconds and triggered the soft lockup watchdog. Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this same problem in the generic batch ops, but not in this htab-native path, which every htab-based hash map variant uses for its lookup[_and_delete] batch ops. Complete that fix here. Leave the critical section after 64 consecutive empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved bucket cursor. No locks are held at that point, and resuming from the cursor is already the function's behavior for non-empty buckets. Add the same call to the per-bucket loop after copy_to_user(), where every lock has been dropped. cond_resched_rcu() is not enough here: sleeping with bpf_prog_active elevated makes tracing programs on that CPU silently skip their invocations. Plain cond_resched() is not enough either. It is a no-op under PREEMPT and PREEMPT_LAZY, the only models arm64 and x86 have offered since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes"). It is also never a Tasks RCU quiescent state, in any model: the reschedule counts as a preemption. The walking task stays a holdout and stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline teardown included, until the syscall returns [1]. cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports the quiescent state at each yield and still reschedules as cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. | |
| Title | bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-10-18T15:20:15.380Z
Reserved: 2026-09-25T10:25:14.362Z
Link: CVE-2026-98644
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-18T16:17:17.623
Modified: 2026-10-18T16:17:17.623
Link: CVE-2026-98644
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.