Export limit exceeded: 53024 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (53024 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64522 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock. | ||||
| CVE-2026-64496 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. | ||||
| CVE-2026-64456 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio: clamp device-reported used.len at copy_data() random_recv_done() stores the device-reported used.len directly into vi->data_avail. copy_data() then indexes vi->data[] using vi->data_idx (advanced by previous copy_data() calls) and issues a memcpy() without re-validating either value against the posted buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32 or 64). A malicious or buggy virtio-rng backend can set used.len beyond sizeof(vi->data), steering the memcpy() past the end of the inline array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes those bytes into the guest RNG, and guest root can also observe them directly via /dev/hwrng. Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host. KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend has been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20) Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened usb9pfs_rx_complete() against unchecked device-reported length in the USB 9p transport. With the clamp at point of use and array_index_nospec() in place, the same harness boots cleanly: copy_data() returns zero for the bogus report, the device-supplied bytes after data_idx are discarded, and the driver issues a fresh request. | ||||
| CVE-2026-64450 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state. | ||||
| CVE-2026-64448 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: restrict implied bcc[0] exemption to responses without data area smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the ---truncated--- | ||||
| CVE-2026-64445 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth() OnAuth() has two bugs in the shared-key authentication path. When the Privacy bit is set, rtw_wep_decrypt() is called without verifying that the frame is long enough to contain a valid WEP IV and ICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_len and then passed as (length - 4) to crc32_le(). If len is less than WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative and, after the implicit cast to size_t, causes crc32_le() to read far beyond the frame buffer. Add a minimum length check before accessing the IV field and calling the decryption path. When processing a seq=3 response, rtw_get_ie() stores the Challenge Text IE length in ie_len, but the subsequent memcmp() always reads 128 bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of exactly 128 bytes; reject any IE whose length field differs, matching the check already applied to OnAuthClient(). | ||||
| CVE-2026-64444 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. | ||||
| CVE-2026-64443 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop The IE parsing loop in update_beacon_info() advances by (pIE->length + 2) each iteration but only guards on i < len. When a malicious AP sends a Beacon whose last IE has only one byte remaining in the frame (the element_id byte lands at len-1), the loop reads pIE->length from one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond len, passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len. Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length for consistency with the sizeof(*pIE) guards added above. | ||||
| CVE-2026-64442 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl() Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end. | ||||
| CVE-2026-64441 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. | ||||
| CVE-2026-64436 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches. | ||||
| CVE-2026-64422 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP socket state. The sysctl is stored as an `int` but copied into the `u32` `tp->reordering` field for new sockets, so negative writes wrap to large values. With `tcp_mtu_probing=2`, the wrapped value can overflow the `tcp_mtu_probe()` size calculation and drive the MTU probing path into an out-of-bounds read. Route `tcp_reordering` writes through `proc_dointvec_minmax()` and require it to be at least 1. Also require `tcp_max_reordering` to be at least 1 so the configured maximum cannot become negative either. When registering the table for a non-init network namespace, relocate `extra2` pointers that refer into `init_net.ipv4` so the `tcp_reordering` upper bound follows that namespace's `tcp_max_reordering`. Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`. This keeps the send queue and window checks from being bypassed through signed integer overflow. | ||||
| CVE-2026-64412 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: module names must be null-terminated We need to explicitly check the length, else we may pass non-null terminated string to request_module(). | ||||
| CVE-2026-64411 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy. | ||||
| CVE-2026-64387 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix query directory replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_query_directory_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64386 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix query_info() replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_query_info_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64385 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_ioctl() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_ioctl_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64384 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64382 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_open() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_open_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64380 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely. | ||||