| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security issue was discovered in MongoDB mongos (the sharded cluster router) where an authenticated user with readWrite privileges could crash the mongos process by crafting a specially formed aggregation pipeline. The issue leverages an internal aggregation stage that lacks proper authorization checks despite being intended for internal use, allowing a subsequent stage to be forced to execute on the router under conditions it was not designed to handle. This results in an unhandled fatal error that causes the mongos process to immediately abort, resulting in denial of service for all clients routed through the affected mongos instance. |
| Gitoxide gix-pack before 0.75.0 contains a denial of service vulnerability that allows malicious remotes to crash fetch operations by sending crafted thin-pack OFS_DELTA entries. Attackers can serve a thin pack with a REF_DELTA referencing an existing object followed by an OFS_DELTA whose base_distance exceeds pack_offset, triggering a panic in LookupRefDeltaObjectsIter that aborts the fetch process. |
| FreeRDP 3.11.0 before 3.32.1 contains a reachable assertion vulnerability in urb_isoch_transfer that allows malicious RDP servers to crash clients by sending unvalidated OutputBufferSize values. Attackers can send a TS_URB_ISOCH_TRANSFER IN-direction request with OutputBufferSize above INT32_MAX over URBDRC, triggering an assertion in libusb_udev_isoch_transfer that terminates the client. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. From version 2023.07 through version 2026.07, nanocoap_fileserver callers in sys/net/application_layer/nanocoap/fileserver.c ignore a failure returned by _resp_init() when coap_build_reply() cannot fit a response header into the response buffer. A remote client can send a CoAP request with a sufficiently large extended token when nanocoap_token_ext is enabled, causing response initialization to fail while _get_file() or _get_directory() continues with stale response state. The path then reaches _calc_szx2() and its pdu->payload_len > reserve assertion, terminating the affected service or device task. No fixed release is available as of this review. |
| A security issue was discovered in MongoDB mongos (the sharded cluster router) where an authenticated user with readWrite privileges could crash the mongos process by crafting a specially formed aggregation pipeline. The issue leverages an internal aggregation stage that lacks proper authorization checks despite being intended for internal use, allowing a subsequent stage to be forced to execute on the router under conditions it was not designed to handle. This results in an unhandled fatal error that causes the mongos process to immediately abort, resulting in denial of service for all clients routed through the affected mongos instance. |
| FreeRDP 3.0.0 before 3.32.0 does not remove card handles when Emulate_SCardReleaseContext releases a smartcard-emulation context, so Emulate_SCardTransmit later looks up the deleted parent context and reaches a terminating WINPR_ASSERT. A malicious RDP server can crash a connecting client with smartcard emulation and redirection enabled by releasing a context, establishing another, and issuing SCardTransmit with the stale card handle. |
| ZcashFoundation Zebra 6.4.0 before 6.4.2 parses version 6 transactions carrying a pre-NU6.3 consensus branch ID, but the size computation during UnminedTx construction treats re-serialization of the Orchard bundle as infallible, so the resulting error trips an expect that aborts zebrad. Unauthenticated peers can send a single pre-handshake tx message to crash the node, and can repeat this after each restart. |
| gitoxide gix-pack before 0.75.0 contains a reachable assertion in BytesToEntriesIter::new_from_header: the pack header decoder accepts version 3, but a release-enabled assert_eq! requires version 2. A malicious remote can send a 12-byte pack header declaring version 3 to panic the client and abort the clone or fetch. |
| FreeRDP 3.0.0-beta1 before 3.32.0, when built with verbose WinPR assertions and using smartcard emulation, has a reachable assertion: the emulated SCardStatusA passes a NULL reader-name destination to scard_copy_strings. A malicious RDP server can send an SCardStatusA request with fmszReaderNamesIsNULL=1 to abort a connecting client. |
| FreeRDP 3.11.0 before 3.32.0 does not validate that AVC444 and AVC444v2 region widths are even before YUV444 conversion, so an odd width reaches an assertion and aborts the client. A malicious or compromised RDP server can terminate a connected FreeRDP client after RDPGFX AVC444 negotiation by sending an in-bounds region rectangle with an odd width. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it.
A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND.
With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. |
| The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool.
A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND.
In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently.
The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission. |
| Navigating to a certain URL on the switch’s web server causes the switch to reboot. This can be automated using a tool like curl to create DoS conditions where the switch constantly reboots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't allow injecting frames wider than the chanctx
Frames injected on a monitor interface can carry a radiotap
field requesting a bandwidth, which mac80211 passes down to
the driver regardless of the the actual operational bandwidth.
If the bandwidth requested is too wide, that triggers a warning
in hwsim:
WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw))
Drop such frames entirely instead since they cannot be sent. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: only group hidden BSSes with beacon entries
When a probe response for an unknown BSS comes in, __cfg80211_bss_update()
looks for an existing entry with the same BSSID and a hidden (zero-length
or NUL-filled) SSID, and if it finds one it groups them, using the beacon
IEs from the existing entry.
But that could find another entry without a beacon, if it was also from a
probe response (with SSID), so there's a group without beacon elements.
If a beacon with a hidden SSID for that BSSID arrives later,
cfg80211_combine_bsses() goes looking for the probe response entries that
belong to it - i.e. entries with the same BSSID and channel that have no
beacon IEs - and finds those two. They are already grouped with each
other, so it hits its
WARN_ON_ONCE(bss->pub.hidden_beacon_bss)
WARN_ON_ONCE(!list_empty(&bss->hidden_list))
which are there because an entry without beacon elements is not supposed
to be part of a group yet.
Only combine entries when a beacon was already received, ones that are
kept separate will be combined when a beacon arrives. |
| A reachable assertion in the illumos bhyve instruction emulator allows a guest to panic the host. When emulating a REP-prefixed MOVS or STOS instruction that accesses guest MMIO, vie_emulate_movs() and vie_emulate_stos() in usr/src/uts/intel/io/vmm/vmm_instruction_emul.c do not clear the VIES_REPEAT status flag on the final iteration. For MMIO regions emulated in the kernel (the local APIC, I/O APIC and HPET), the stale flag causes a VERIFY assertion in vie_advance_pc() to fail, and the host panics. A privileged user within a guest VM can issue a REP MOVS or REP STOS instruction against the local APIC page to cause a denial of service of the host and every other guest running on it. The flaw has existed since 2020 (illumos-gate commit e0c0d44e), and affects any illumos distribution prior to illumos-gate commit 696ecf8d. |
