| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: avoid leaking a netdev ref on module flash errors
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Do not re-initialize smc hashtables
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Check for underflow in xfrm_state_mtu
Leo Lin reported OOB write issue in esp component:
xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned
modulo-2^32 space using an attacker-influenced "header_len + authsize +
net_adj" subtracted from a small "mtu" argument. A nobody user can
install an IPv4 ESP tunnel SA with a large authentication key
(XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc),
configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a
large value. When a single UDP datagram is then sent through the
tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and
esp_output() consumes it as a signed int via:
padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached))
esp.tfclen = padto - skb->len (assigned to int)
esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t
when passed to memset() inside esp_output_fill_trailer(), producing a
~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as
"Write of size 18446744073709551537 at addr ffff888...".
Check for underflow and return 1. This causes the sendmsg attempt to
fail with ENETUNREACH. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()
A race condition exists in the NFC LLCP connection state machine where
the connection acceptance packet (CC) can be processed concurrently with
socket release. This can lead to a use-after-free of the socket object.
When nfc_llcp_recv_cc() moves the socket from the connecting_sockets
list to the sockets list, it does so without holding the socket lock.
If llcp_sock_release() is executing concurrently, it might have already
unlinked the socket and dropped its references, which can result in
nfc_llcp_recv_cc() linking a freed socket into the live list.
Fix this by holding lock_sock() during the state transition and list
movement in nfc_llcp_recv_cc(). After acquiring the lock, check if
the socket is still hashed to ensure it hasn't already been unlinked
and marked for destruction by the release path. This aligns the locking
pattern with recv_hdlc() and recv_disc(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix use-after-free in llcp_sock_release()
llcp_sock_release() unconditionally unlinks the socket from the local
sockets list. However, if the socket is still in connecting state, it
is on the connecting list.
Fix this by checking the socket state and unlinking from the correct list. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When sfb has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (sfb in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(sfb) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (sfb). And herein lies the problem.
- sfb will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full)
[ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq]
[ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216
[ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0
[ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3
[ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000
[ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000
[ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000
[ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0
[ 127.598390][ T453] PKRU: 55555554
[ 127.598509][ T453] Call Trace:
[ 127.598629][ T453] <TASK>
[ 127.598718][ T453] ? mark_held_locks+0x40/0x70
[ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599053][ T453] sfb_dequeue+0x88/0x4d0
[ 127.599174][ T453] ? ktime_get+0x137/0x230
[ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq]
[ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf]
[ 127.599988][ T453] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: button: Fix ACPI GPE handler leak during removal
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task->mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Instead of serializing the mm access by introducing extra acquisition of
rq lock in the mm free path, extract sched_cache_stat from mm_struct,
rename it as sched_cache_group and manage its life cycle apart from
mm_struct with its own ref counting. This allows us in the next patch
access sched_cache_group directly from task, and add a refcount
on sched_cache_group when a task links to it. This prevents the use
after free issue when accessing stale and released old mm and its
sched cache stat a task switches to a new mm while account_mm_sched()
is done elsewhere.
The other benefit of this restructure is in the future, the grouping of
tasks to a LLC would have the flexibility to be associated with a user
defined grouping, or cgroup, cookie group, numa_group or others instead
of just with a single mm address space.
Rename sched_cache_stat to sched_cache_group and turn it into a refcounted
object allocated from mm_struct. The mm_struct now holds a pointer
(sched_cache_grp) to this object instead of embedding it. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.DX4 when a
delivery to a local address of the node reaches the socket lookup.
For example, a UDP socket bound to the enslaved ingress interface
does not receive any of the decapsulated packets, while an unbound
socket outside the VRF does.
This contradicts Documentation/networking/vrf.rst: by default the
scope of an unbound UDP or TCP socket is limited to the default VRF.
Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does
the same for IPv6. The socket lookup then matches the decapsulated
packet like any other packet received on that enslaved interface. Such
a packet matches an unbound UDP or TCP socket only when
udp_l3mdev_accept or tcp_l3mdev_accept is set. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
When mac80211 removes a sta, it calls .sta_state() which in turn calls
ath11k_mac_station_remove(). In that function we clean up both peers &
arsta related resources.
But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which
assumes that all driver related resources are cleaned up beforehand. This
cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not
in fact free arsta->rx_stats / tx_stats.
Extract the arsta cleanup from ath11k_mac_station_remove() into a
new ath11k_mac_station_cleanup() and call it from both there and
ath11k_mac_peer_cleanup_all().
This should handle kmemleaks reports like:
unreferenced object 0xffffff801ae66400 (size 1024):
comm "hostapd", pid 1306, jiffies 4295011565
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc d61c08ec):
kmemleak_alloc+0x3c/0x50
__kmalloc_cache_noprof+0x2b0/0x3e0
ath11k_mac_op_sta_state+0x1dc/0xb10
drv_sta_state+0xac/0x6f8
sta_info_insert_rcu+0x314/0x5e0
sta_info_insert+0x14/0x38
ieee80211_add_station+0x10c/0x1a0
nl80211_new_station+0x3e8/0x680
genl_family_rcv_msg_doit+0xc0/0x120
genl_rcv_msg+0x1b4/0x258
netlink_rcv_skb+0x4c/0x108
genl_rcv+0x38/0x60
netlink_unicast+0x190/0x278
netlink_sendmsg+0x15c/0x370
____sys_sendmsg+0x120/0x290
___sys_sendmsg+0x70/0xa0
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: clear free space tree creation state on rebuild failure
btrfs_rebuild_free_space_tree() sets BTRFS_FS_CREATING_FREE_SPACE_TREE
before rebuilding the free space tree. Several error paths return
without clearing this flag.
The transaction restart failure path can leave the flag set on a live
filesystem, causing delayed reference processing to be skipped. Clear it
on all free space tree rebuild failure paths. Keep
BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED set, since a failed rebuild leaves
the free space tree untrusted. Callers must fall back to extent-tree
caching. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: percpu: Fix LSE operations on {8,16}-bit types
The assembly for __percpu_##name##_case_##sz() and
__percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro
argument to form the LSE instruction. Without 'sfx', a W register
argument will imply a 32-bit memory location, and consequently
{8,16}-bit ops will erroneously read and write 32 bits of memory when
the LSE instruction is used.
Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not
necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is
a register-register operation which does not access memory (and does not
take a size suffix). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
iso_get_sock() returns the parent socket with a reference held, which is
dropped by sock_put() once the child socket has been set up. The error
path taken when iso_sock_alloc() fails only calls release_sock() and
returns, leaking the reference and thus the parent socket itself.
Drop the reference on that path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
