| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit
1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing. |
| A flaw has been found in jkawamoto mcp-florence2 up to 0.3.13. Affected by this issue is the function get_images of the file src/mcp_florence2/__init__.py. This manipulation of the argument src causes server-side request forgery. The attack may be initiated remotely. The exploit has been published and may be used. It is recommended to change the configuration settings. The vendor explains: "For deployments where SSRF protection is required, I recommend routing all HTTP(S) requests through an SSRF-safe proxy server. This approach mitigates the vulnerability without requiring changes to the mcp-florence2 source code." |
| A vulnerability was identified in graphlit graphlit-mcp-server 1.0.1. This affects the function fetch of the file src/tools.ts of the component ssrf-test Endpoint. Such manipulation of the argument url leads to server-side request forgery. The attack may be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Prebid Server is an open-source solution for running real-time advertising auctions in the cloud. Prior to version 4.4.0, certain bidder adapters in Prebid Server interpolate user-supplied parameters into outbound request URLs without properly validating host and subdomain values, allowing crafted bid request parameters to cause server-side requests to unintended destinations and potentially expose internal network services or sensitive server endpoints. This issue is fixed in version 4.4.0. |
| Budibase is an open-source low-code platform. Prior to 3.41.3, automation steps in packages/server/src/automations/steps/outgoingWebhook.ts, packages/server/src/automations/steps/zapier.ts, packages/server/src/automations/steps/n8n.ts, packages/server/src/automations/steps/slack.ts, and packages/server/src/automations/steps/discord.ts use node-fetch on user-provided URLs without the BLACKLIST_IPS enforcement used by the REST integration, allowing an authenticated user to make server-side requests to cloud metadata and internal services. This issue is fixed in version 3.41.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: not change 0-byte $DATA attribute to non-resident
When ntfs_resident_attr_resize() cannot grow a resident attribute in
place, it retries after converting other resident attributes to
non-resident to free space in the MFT recrord.
Do not select zero-length resident $DATA attributes for this conversion.
fsck treats 0-byte non-resident $DATA attribute as corruptions. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
When hardware page table walker (PTW) is enabled on LoongArch, the CPU
may set _PAGE_DIRTY directly in the page table entry during a write TLB
miss, without going through the software TLB store handler. The software
TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED
together:
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e.
_PAGE_MODIFIED is left unchanged. This creates a window where a PTE has
_PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED
clear (software is unaware).
When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls
pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and
_PAGE_DIRTY bits:
pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY);
Since _PAGE_MODIFIED was never set, the dirtiness information is lost
completely. Subsequently, when memory pressure triggers page reclaim,
page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty()
returns false) and the page may be freed without writeback, causing data
corruption.
Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in
both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits:
if (pte_val(pte) & _PAGE_DIRTY)
pte_val(pte) |= _PAGE_MODIFIED;
The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case,
where pmd entries need the same treatment.
This ensures the software dirty tracking bit (checked by pte_dirty() and
pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is
preserved across fork COW write-protection.
The issue was found by the LTP madvise09 test case, which exercises page
reclaim after "madvise(MADV_FREE), write and fork" operation sequence on
private anonymous mappings. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: qcom: clear opened when stream enable fails
On enable, subs->opened is set before the service_interval is validated;
an invalid interval jumps to the response label without clearing it, so
the substream is wedged at -EBUSY until a disable or disconnect.
Clear subs->opened on the enable error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix QID bit leak in pqm_create_queue()
When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during
the first queue creation for a process, pqm_create_queue() returns
early via 'return retval' without going through the err_create_queue
cleanup label.
This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called,
leaving the reserved QID bit permanently set in queue_slot_bitmap.
Over time this leaks QID slots, potentially exhausting all available
queue slots.
Fix this by replacing 'return retval' with 'goto err_allocate_pqn'
so that clear_bit() is always called on the error path without
touching the uninitialized pqn pointer.
AILIKFD-813
(cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix refcount leak in nvmet_sq_create()
In nvmet_sq_create(), a reference on the ctrl is taken
via kref_get_unless_zero() before calling nvmet_check_sqid().
If nvmet_check_sqid() fails, the function returns the error
directly without releasing the reference, leading to a leak.
Fix this by jumping to the "ctrl_put" label, which already
performs the necessary nvmet_ctrl_put(ctrl). This ensures the
reference is properly released on this error path. |
| The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1057. This is due to insufficient validation of user-supplied URLs in the render_csv_data() function, which can be bypassed by including 'docs.google.com/spreadsheets' in a query parameter, and the subsequent use of these URLs in fopen() calls without blocking internal or private network addresses. This makes it possible for authenticated attackers, with Contributor-level access and above, to make requests to arbitrary URLs and retrieve sensitive information from internal services. |
| Budibase is an open-source low-code platform. Prior to 3.40.0, packages/backend-core/src/utils/outboundFetch.ts pinned a validated address through a Node agent, but the REST integration used getDispatcher from packages/backend-core/src/utils/fetch.ts, causing undici to ignore that agent and resolve the hostname again. A builder could use DNS rebinding to make packages/server/src/integrations/rest.ts connect to an internal address after a public address passed validation, with full response access and arbitrary REST methods. The fix adds createPinnedLookup support to the undici dispatcher and passes the validated address to custom fetch implementations. This issue is fixed in version 3.40.0. |
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the HTTPSFetcher._do_fetch() method passes a user-supplied URL directly to requests.get() without validation. This allows an attacker to perform Server-Side Request Forgery, targeting internal services or cloud metadata endpoints. Versions 3.12.2 and 4.0.3 fix the issue. |
| Apache Allura's webhooks are vulnerable to Server-Side Request Forgery (SSRF).
This issue affects Apache Allura: before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled. |
| The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1064 via the Form Builder widget's 'webhook_url' setting. The widget's render() method persists the attacker-controlled URL into the wpr_webhook_url_{widget_id} option on every render (including a Contributor previewing their own draft), and the wpr_form_builder_webhook AJAX handler — registered for both authenticated and unauthenticated callers — reads that option and dispatches the outbound request via the non-safe wp_remote_post(), with no host allowlist, no scheme restriction, and no private/loopback IP filter (the plugin's existing wpr_is_blocked_remote_host / wpr_is_private_or_local_ip helpers are not called on this path). This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| stoatchat versions before 0.15.0 fail to block the IPv6 unspecified address (::) in the SSRF blocklist, allowing unauthenticated attackers to bypass protections via the /proxy and /embed endpoints. Attackers can craft requests using IPv6 literal syntax to access services on the loopback interface and retrieve sensitive internal content. |
| A vulnerability has been found in gomarble-ai facebook-ads-mcp-server 0.1.0. The impacted element is the function fetch_pagination_url of the file server.py. Such manipulation leads to server-side request forgery. The attack can be launched remotely. The name of the patch is 4e53875aa22e8991c2fa4a7660d86e1caba66659. Applying a patch is advised to resolve this issue. |
