| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SGLang through 0.5.21 contains a resource budget bypass vulnerability that allows remote attackers to override GLM-V video processing limits by supplying fps, max_frames, max_tokens_per_frame and max_image_tokens in the video_url object. Attackers can set these values arbitrarily high so glm4v.py decodes every frame of high-resolution video at full size, exhausting worker memory and denying service. |
| A security flaw has been discovered in Linksys E1700 1.0.0.4.003. Impacted is the function addStaticRoute of the file /goform/addStaticRoute of the component Static Route Handler. Performing a manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Linksys E1700 1.0.0.4.003. This affects the function setLinksysIpv6 of the file /goform/setLinksysIpv6. The manipulation of the argument _6rd_prefix/_6rd_prefix_len results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex allows an untrusted package mirror to exhaust the memory or disk space of the machine running mix deps.get, mix deps.update, mix hex.package fetch or mix hex.docs fetch.
Hex treats a mirror configured with HEX_MIRROR_URL, HEX_MIRROR or mirror_url as untrusted: it doesn't send credentials to it, and it checks registry signatures and package checksums that the mirror can't forge. Several response paths consume memory or disk in proportion to what the mirror sends before any of those checks run.
Hex.HTTP.request/5 reads the whole response body into memory and decompresses it with :zlib.gunzip/1 whenever the response's Content-Encoding contains gzip, with no limit on the compressed or decompressed size. Hex doesn't ask for compressed responses, so the server decides whether this step runs. It applies to registry, package, docs and API responses.
Package tarballs have no download size limit. Hex 2.5.1 holds the whole tarball in memory and writes it to the cache, and the development branch streams it to a temporary file; the 16 MiB tarball limit is checked only when the file is unpacked. The tarball is then unpacked, into deps/<app> in 2.5.1 and into a staging directory on the development branch, before its checksums are compared with the registry.
mix hex.docs fetch, and mix hex.docs offline when docs are missing, write the docs tarball to disk and extract it with :mix_hex_erl_tar.extract/2 without the 16 MiB compressed and 128 MiB decompressed limits that mix_hex_tarball:unpack_docs/3 applies. The signed registry doesn't cover docs tarballs, so nothing checks them.
Registry responses are also decompressed before their signature is checked, in hex_core code that Hex vendors; that part is tracked in https://github.com/hexpm/hex_core/security/advisories/GHSA-7c4r-cgf9-9jmq.
This issue affects hex: from 0.11.2 before 2.5.2. |
| LogicalDOC Community Edition through 9.3 contains an unauthenticated file upload vulnerability in the UploadServlet that allows remote attackers to write files to disk without a session. Attackers can repeatedly send multipart requests with unlimited file parts to /upload, persisting files in uncleaned temporary directories and exhausting server disk space. |
| braces through 3.0.3 contains a stack overflow vulnerability in the recursive AST walkers that lack depth guards. Attackers can supply deeply nested brace patterns under the character limit to exhaust the call stack and terminate the Node.js process with an uncaught RangeError. |
| A vulnerability was detected in TRENDnet TEW-751DR, TEW-752DRU and TEW733GR 1.03B01/1.03B03. Affected is the function fwrite of the file pigwidgeon.cgi of the component Web Management Backend. The manipulation of the argument service results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "As this router was EOL'd in 2011, we have no way of testing if such vulnerability exists. We will notify our customers of a potential vulnerability on this product." This vulnerability only affects products that are no longer supported by the maintainer. |
| The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it.
A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND.
With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. |
| The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool.
A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND.
In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently.
The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
When mac80211 removes a sta, it calls .sta_state() which in turn calls
ath11k_mac_station_remove(). In that function we clean up both peers &
arsta related resources.
But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which
assumes that all driver related resources are cleaned up beforehand. This
cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not
in fact free arsta->rx_stats / tx_stats.
Extract the arsta cleanup from ath11k_mac_station_remove() into a
new ath11k_mac_station_cleanup() and call it from both there and
ath11k_mac_peer_cleanup_all().
This should handle kmemleaks reports like:
unreferenced object 0xffffff801ae66400 (size 1024):
comm "hostapd", pid 1306, jiffies 4295011565
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc d61c08ec):
kmemleak_alloc+0x3c/0x50
__kmalloc_cache_noprof+0x2b0/0x3e0
ath11k_mac_op_sta_state+0x1dc/0xb10
drv_sta_state+0xac/0x6f8
sta_info_insert_rcu+0x314/0x5e0
sta_info_insert+0x14/0x38
ieee80211_add_station+0x10c/0x1a0
nl80211_new_station+0x3e8/0x680
genl_family_rcv_msg_doit+0xc0/0x120
genl_rcv_msg+0x1b4/0x258
netlink_rcv_skb+0x4c/0x108
genl_rcv+0x38/0x60
netlink_unicast+0x190/0x278
netlink_sendmsg+0x15c/0x370
____sys_sendmsg+0x120/0x290
___sys_sendmsg+0x70/0xa0
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| mcp-go through 1.2.1 contains a denial of service vulnerability in StreamableHTTPServer.ServeHTTP that allows remote unauthenticated attackers to exhaust memory by sending oversized POST bodies. Attackers can send arbitrarily large or many concurrent POST requests, read fully via io.ReadAll before validation, to degrade or OOM-kill the server process. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
| An issue in Netcore B11 Enterprise-level full Gigabit 9-port shop wireless router v1.3.241114.024540 and before allows a remote attacker to execute arbitrary code via the www\cgi-bin\upgrade file |
| Hatchet through 0.110.5 contains an allocation of resources without limits vulnerability that allows unauthenticated attackers to exhaust memory via the SNS ingestion endpoint. Attackers can send arbitrarily large or concurrent request bodies to POST /api/v1/sns/{tenant}/{event} with any UUID, which the SnsUpdate handler buffers before signature verification, degrading availability. |
| A vulnerability was found in TOZED X300 up to 6.01.3. This vulnerability affects the function process_ping of the component IPPingDiagnostics Handler. The manipulation of the argument Host results in os command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in OpenSpug Spug up to 3.4.0/4.0.1. This impacts an unknown function of the file /exec/transfer of the component File Transfer. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state->event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is nothing to be done at complete_signaling(). Use
drm_event_cancel_free() as that will also undo drm_event_reserve_init()
in case it has been called. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: reset the CSA state when leaving
ifmsh->csa is allocated in ieee80211_mesh_csa_beacon() and only freed
in ieee80211_mesh_finish_csa(), i.e. when the channel switch completes.
Leaving the mesh while a switch is still pending therefore leaks it.
Additionally, ifmsh->csa_role and ifmsh->chsw_ttl have their state leak
in this case, so things can get mixed up in addition to the memory
leak.
Refactor the reset and call it in ieee80211_stop_mesh() to fix it all. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: unregister and release hooks on error
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net->nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: free skb when disconnected
When the simulated link is disconnected, virt_wifi_start_xmit() returns
NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this
return value as consumed, so every packet sent while disconnected leaks its
skb.
Free the skb before returning the drop status. |
