| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: smc: fix splice entry lifetime imbalance in smc_rx_splice
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: release template ct on non-IP path
A bridge nftables ct zone set rule can attach a conntrack template to
an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6
EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with
IP_CT_UNTRACKED without releasing the existing template reference.
That makes the per-cpu template, and any temporary templates allocated
for concurrent use, unreachable and leaks memory until the host runs out
of slab.
Reset the skb conntrack state before marking the frame untracked so the
existing template reference is dropped on the non-IP path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: defer invalid log until after unlock
TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock
is still held.
When invalid logging is routed to nfnetlink_log and conntrack export is
enabled, the log path can re-enter conntrack netlink glue and dump the
same conntrack again. Protocol attribute dumping may take ct->lock, so
logging while holding that lock can deadlock.
Defer the TCP invalid logs by storing only the minimal log context while
ct->lock is held and emitting the log after unlocking. Also make the TCP
timeout-lowering invalid path return whether a log is needed, then emit
that log after unlocking.
Do the same for the SCTP invalid state-transition log that can be reached
while ct->lock is held.
Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers
that log invalid conntracks while holding ct->lock are caught outside TCP
and SCTP as well. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix sk_buff leak when the header checks reject a packet
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: read le->link under the node lock in tipc_node_link_down()
tipc_node_link_down() caches the link pointer before taking n->lock:
struct tipc_link *l = le->link; /* unlocked */
if (!l)
return;
tipc_node_write_lock(n);
if (!tipc_link_is_establishing(l)) { /* deref l */
...
tipc_link_reset(l); /* write into l */
if (delete) {
kfree(l);
le->link = NULL;
The delete=true caller frees that very object under n->lock, so the lock
does not protect the cached pointer against it:
- CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link
supervision timer via tipc_node_timeout(), reads l unlocked and then
dereferences it under n->lock;
- CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable()
-> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true)
-> kfree(l).
The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers
disable_media() only schedules the asynchronous cleanup_bearer() work, so
its synchronize_net() runs after the links are already gone. An in-flight
CPU A that has read l therefore dereferences freed memory once B frees it:
a use-after-free read in tipc_link_is_establishing(), and a use-after-free
write via tipc_link_reset() on the establishing branch.
The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6:
BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285)
Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0
tipc_link_is_establishing (net/tipc/link.c:285)
tipc_node_link_down (net/tipc/node.c:1076)
tipc_node_timeout (net/tipc/node.c:843)
Allocated by task 9549:
tipc_link_create (net/tipc/link.c:490)
tipc_node_check_dest (net/tipc/node.c:1279)
tipc_disc_rcv (net/tipc/discover.c:252)
tipc_udp_recv (net/tipc/udp_media.c:389)
Freed by task 9549:
tipc_node_link_down (net/tipc/node.c:1084)
tipc_node_delete_links (net/tipc/node.c:1320)
bearer_disable (net/tipc/bearer.c:414)
__tipc_nl_bearer_disable (net/tipc/bearer.c:992)
Move the le->link read inside tipc_node_write_lock(), so it is serialised
against the kfree() in the delete path. A racing teardown now either has
not run yet, and we see a valid link, or has already run, and we see NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "thermal/drivers/hwmon: Cleanup coding style a bit"
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix Route Information option length validation
rt6_route_rcv() validates the Route Information option (RFC 4191) length
against the prefix length, but both checks are off by one.
rinfo->length is the ND option length in units of 8 octets and it
*includes* the 8-byte option header, so an option carrying N bytes of
prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3
when Prefix Length is greater than 64, and 2 or 3 when it is greater
than 0. The code accepts length >= 2 and length >= 1 respectively.
ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix,
so a Router Advertisement with (prefix_len=128, length=2) or
(prefix_len=64, length=1) makes the kernel read up to 8 bytes past the
end of the option. Those bytes end up in the prefix of the route that
gets installed, so they are visible to userspace:
# RA with a Route Information option (prefix_len=128, length=2)
# followed by a source link-layer address option, 01 01 de ad be ef ca fe
$ ip -6 route show
2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra
^^^^^^^^^^^^^^^^^^ the next option, read out of bounds
When the Route Information option is the last one in the packet, those
eight bytes come from the skb tail room instead.
Reject the option lengths RFC 4191 does not allow. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: reset the vring metadata cache on vring reconfiguration
vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring
metadata region, and iotlb_access_ok() returns early on a cache hit,
taking the hit as proof that the region has already been validated:
if (vhost_vq_meta_fetch(vq, addr, len, type))
return true;
The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on
device IOTLB (re)initialisation and on vq reset, but not when
VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when
VHOST_SET_VRING_NUM changes the region sizes.
With a device IOTLB attached both ioctls are accepted while the vq is
live, and neither validates the addresses at ioctl time: vq_access_ok()
and vq_log_used_access_ok() return true early because the addresses are
GIOVAs, deferring validation to prefetch time. Once the cache has been
populated that deferred validation no longer runs -- vq_meta_prefetch()
hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps
translating through the old mapping as
map->addr + addr - map->start
for an address the mapping no longer covers. vhost_copy_to_user() and
vhost_copy_from_user() consume the result with __copy_to_user() and
__copy_from_user(), which do not check it either, so a subsequent used
ring update or descriptor fetch accesses memory outside the region the
IOTLB actually maps.
Reset the metadata cache whenever the vring is reconfigured, so the new
addresses are pushed back through iotlb_access_ok()'s slow path. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: fix out-of-bounds read in keyring_get_key_chunk()
For description-level chunks keyring_get_key_chunk() advances the read
pointer by level * sizeof(long) past the inline prefix but only
bounds-checks the prefix, so a long enough key description is read past
its kmemdup(desc, desc_len + 1) allocation. Compute the full byte
offset and bounds-check the description against it before reading.
The walk only reaches a description-level chunk when two keys collide
through the hash, x, type and domain_tag chunks, so this is reached from
an unprivileged add_key(2) with a crafted pair of same-type keys whose
index hashes collide; KASAN reports a slab-out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the
dsthash_ent structure which represents an entry in the hashtable. There
is a union area which uses a different layout to express the rate match
mode.
Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode
flag is requested by two or more different rules that refer to the same
hashtable. Otherwise, uninitialized access to the burst field in the
union is possible.
Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by
revision less than 3 too. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the
target-supplied data segment. The segment carries a 2-byte sense length
followed by the sense bytes, so it must hold 2 + senselen bytes, but the
bounds check only requires datalen >= senselen:
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
A target that returns a SCSI Response whose datalen equals senselen
(with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data +
2 read up to two bytes past the received data. Those bytes are stale
conn->data contents and end up in the command's sense buffer, which is
returned to userspace.
Account for the 2-byte sense length prefix in the check. |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not send ICMP/NDISC Redirects when peer allocation fails
When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry
under memory pressure or tree size caps, redirect handlers previously fell
back to sending un-rate-limited ICMP/NDISC Redirect messages.
In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL.
In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into
inet_peer_xrlim_allow(), which returned true when peer == NULL.
Because ICMP/NDISC Redirects are not part of the default global rate limit
mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates
an un-rate-limited ICMP packet storm.
Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and
ndisc_send_redirect() when peer is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
forcedeth: fix UAF of txrx_stats in nv_remove
nv_remove() frees the per-CPU txrx_stats before unregister_netdev().
Until unregister completes, ndo_get_stats64, the NAPI/xmit data path,
and nv_close()/drain may still access txrx_stats, leading to a
use-after-free.
Free the stats only after unregister_netdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exponent 32 is too large for 32-bit type int
Fix this by rejecting offshift >= 16 during filter creation in
u32_change(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
iso_sock_timeout() takes lock_sock, so sync disabling the timer while
holding that lock may deadlock.
iso_sock_timeout() may also run concurrently with iso_conn_del(), which
leads to UAF
[Task 1] [Task hdev->workqueue]
iso_sock_timeout iso_conn_del
iso_conn_hold_unless_zero iso_chan_del
`------------> iso_conn_put
caller frees hcon
iso_conn_put
iso_conn_free
conn->hcon->iso_data = NULL; /* UAF */
Fix the deadlock by removing the disable from the lock_sock sections.
Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn
which may need to be freed in lock_sock section. Convert some of the
clear_timer to disable_timer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
