| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| A flaw was found in ml-metadata. The statically-linked gRPC stack in ml-metadata is outdated, making it vulnerable to known HTTP/2 denial of service (DoS) issues. An in-cluster attacker, with network access to the MLMD pod, could exploit these vulnerabilities by sending specially crafted HTTP/2 requests. This could lead to a denial of service by crashing the MLMD pod, disrupting all pipeline runs in the affected namespace. |
| A vulnerability was found in Netcore NBR200V2 1.3.241127.071246. Affected by this issue is some unknown functionality of the file /usr/bin/network_tools of the component LAN IP Configuration Handler. The manipulation of the argument ipv4 results in command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. Prior to 4.14.2, AnyIO starts process-pool workers with standard error connected to a pipe that the parent never drains, even though the documented behavior redirects all three standard streams. Worker code that writes enough attacker-influenced data to sys.stderr can fill the pipe and block before returning the standard-output protocol response, causing the awaiting process-pool call to remain blocked indefinitely. Applications that run untrusted or faulty worker code capable of producing substantial standard-error output are affected. This issue is fixed in version 4.14.2. |
| A flaw was found in Keycloak. When the configuration uses JWT tokens for authentication, the tokens are cached until expiration. If a client uses JWT tokens with an excessively long expiration time, for example, 24 or 48 hours, the cache can grow indefinitely, leading to an OutOfMemoryError. This issue could result in a denial of service condition, preventing legitimate users from accessing the system. |
| This issue was addressed with additional entitlement checks. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, visionOS 27. An app may be able to cause a denial-of-service. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, automatic response decompression on the HTTP/1.1 path uses ChannelManager.newHttpContentDecompressor() to install Http1ContentDecompressor without a cumulative output-size limit. A hostile or compromised server, or an attacker who can alter a response in transit, can send a small gzip, deflate, or snappy response that expands across chunks until the client exhausts its heap and raises OutOfMemoryError; brotli and zstd are also affected when their optional codecs are present. In versions 3.0.8 through 3.0.10, the HTTP/2 decompressor is also unbounded, so switching protocols does not mitigate the issue on those releases. A limit applied to each decode call is insufficient because the response can be delivered as many small chunks, so the fixed implementation tracks total decompressed bytes for the whole response. This issue is fixed in versions 2.16.1 and 3.0.12. |
| adm-zip is a JavaScript library for creating and extracting ZIP archives in Node.js. Prior to 0.6.1, getData() in zipEntry.js trusts an entry's central-directory uncompressed size and allocates output memory before validating that value against the actual compressed data and decompression result. A small crafted ZIP can declare a multi-gigabyte uncompressed size, causing Buffer.alloc and decompression handling to commit excessive resident memory before CRC validation reports an error. Applications that read entries from untrusted archives can therefore be terminated by the operating system or suffer service-wide memory exhaustion. This issue is fixed in version 0.6.1. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 3.0.8 until 3.0.12, a client with maxConnections or maxConnectionsPerHost set above zero leaks one connection permit whenever TLS connection establishment fails before the handshake completes. NettyConnectListener removes the partitionKeyLock permit from NettyResponseFuture before every failure path is bound to the channel closeFuture, so an abort can leave the permit unreleased. Repeated failures can permanently lock out one host under a per-host limit or drain the shared pool under a global limit, blocking later requests even when no connection remains open. The default unlimited connection setting is not affected. This issue is fixed in version 3.0.12. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: fix wrong list iterated in add_direct_chain error path
In add_direct_chain(), newly allocated direct MR entries are added to
the local list 'tmp', which is spliced into mr->head only on success.
On the error path, the cleanup loop was incorrectly iterating over
mr->head instead of tmp.
Fix by iterating over 'tmp' in the err_alloc cleanup path. |
| SGLang versions through 0.5.20 contain an unbounded memory allocation vulnerability in handle_staging_req() that fails to validate chunk_idx from ZMQ STAGING_REQ frames in prefill/decode disaggregation deployments. Attackers with access to the decode engine's internal ZMQ rank port can send a frame with an extremely large chunk_idx value, causing the scheduler to allocate memory until the system runs out and terminates the process. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: register configfs subsystem after creating default devices
In null_init(), configfs_register_subsystem() currently runs before
register_blkdev(), so when null_blk is built as a module, a racing mkdir()
+ poweron from userspace can reach null_add_dev() while null_major is still
0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0)
and fails:
[root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0,
[ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
[ 2366.529081] CPU: 26 UID: 0 PID: 1600 Comm: sh Not tainted 7.2.0-rc1+ #66 PREEMPT(full)
......
[ 2366.547251] Call Trace:
[ 2366.547575] <TASK>
[ 2366.547831] ? _raw_spin_lock+0x84/0xe0
[ 2366.548260] add_disk_fwnode+0x114/0x560
[ 2366.548739] null_add_dev+0x102d/0x1b80 [null_blk]
[ 2366.549310] ? __pfx_null_add_dev+0x10/0x10 [null_blk]
[ 2366.549906] ? mutex_lock+0xde/0x1c0
[ 2366.550361] ? __pfx_mutex_lock+0x10/0x10
[ 2366.550827] nullb_device_power_store+0x1e7/0x280 [null_blk]
[ 2366.551499] ? __pfx_nullb_device_power_store+0x10/0x10 [null_blk]
[ 2366.552177] ? __kmalloc_cache_noprof+0x1f5/0x470
[ 2366.552748] ? configfs_write_iter+0x35c/0x4e0
[ 2366.553242] configfs_write_iter+0x286/0x4e0
[ 2366.553787] vfs_write+0x52d/0xd00
[ 2366.554169] ? __pfx_vfs_write+0x10/0x10
[ 2366.554679] ? __pfx___css_rstat_updated+0x10/0x10
[ 2366.555196] ? fdget_pos+0x1cf/0x4c0
[ 2366.555649] ksys_write+0xfc/0x1d0
......
Additionally, the err_dev path destroys all devices on nullb_list while
configfs is still registered. If a racing mkdir() + poweron puts a user
device on the list, null_destroy_dev()->null_free_dev() kfrees the user
device's nullb_device but /sys/kernel/config/nullb/<name> is still
reachable. Any userspace access to the item will trigger a UAF.
For simplicity, move configfs_register_subsystem() to the end to solve
the problems above. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: sunplus: fix error handling in sp_uphy_init()
Fix the error paths of sp_uphy_init() to undo exactly what each stage
did: return directly if clk_prepare_enable() fails, release only the clock
if reset_control_deassert() fails, and jump to err_reset if
update_disc_vol() fails so the clock and reset are not leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds. |
| NUUO Network Video Recorder 2.0.0 is vulnerable to Command Injection in handle_import_privilege.php. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20325 are related to improper neutralization of special elements used in a command issue that are grouped under the Common Weakness Enumeration (CWE) CWE-77. |
| A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain system-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails. |
| Autobahn Python is a WebSocket and WAMP implementation for Python that supports Twisted and asyncio. Prior to 26.7.1, WebSocket endpoints that accept permessage-deflate and rely on maxMessagePayloadSize enforce that limit against the compressed frame length before inflation but do not recheck the decompressed message size before delivery. A remote unauthenticated client can send a valid compressed frame below the configured wire-size limit that expands beyond the application message limit, causing oversized data to be allocated, joined, validated, and passed to application callbacks. This can create resource-exhaustion pressure, but the advisory does not establish confidentiality or integrity impact. This issue is fixed in version 26.7.1. |
| libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.1 and earlier, crafted grid, iovl, and iden reference graphs can repeatedly decode the same base image because processed_ids is copied per branch and ImageItem::decode_image() has no shared operation budget. This vulnerability is fixed in 1.23.2. |
