| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In fixInitiatingUserIfNecessary of CallIntentProcessor.java, there is a possible way to make an emergency call due to a logic error in the code. This could lead to local escalation with User execution privileges needed. User interaction is needed for exploitation. |
| xmlregexp in libxml2 before 2.15.4 has a NULL pointer dereference in xmlRegNewParserCtxt after a strdup failure, i.e., it does not calculate a string length after NULL checking. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
[mani: removed timestamp from log] |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a NULL pointer dereference. |
| NVIDIA DGX Spark contains a vulnerability in the system firmware, where a privileged attacker could be able to cause a NULL pointer dereference. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
| Null pointer dereference in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ] |
| This CVE ID has been rejected as a duplicate. |
| PX4 Autopilot through 1.17.0 contains a null pointer dereference vulnerability in param_set_default_file() and param_set_backup_file() functions that allows attackers to crash the autopilot process. Attackers can invoke 'param select' or 'param select-backup' commands with no path argument from any PX4 shell to trigger the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths
In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().
Both functions check:
if (!dc_dmub_srv || !dc_dmub_srv->dmub)
and then call DC_LOG_ERROR() inside that block.
DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.
Fix this by splitting the checks.
First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.
Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) |
| In the Linux kernel, the following vulnerability has been resolved:
md: make rdev_addable usable for rcu mode
Our testcase trigger panic:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94
PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Workqueue: md_misc md_start_sync
RIP: 0010:rdev_addable+0x4d/0xf0
...
Call Trace:
<TASK>
md_start_sync+0x329/0x480
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x14d/0x180
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: raid10
CR2: 00000000000000e0
---[ end trace 0000000000000000 ]---
RIP: 0010:rdev_addable+0x4d/0xf0
md_spares_need_change in md_start_sync will call rdev_addable which
protected by rcu_read_lock/rcu_read_unlock. This rcu context will help
protect rdev won't be released, but rdev->mddev will be set to NULL
before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by
using READ_ONCE and check does rdev->mddev still alive. |
| CVE-2026-55401 is a null dereference vulnerability on the load-balancing
sub-system of Secure Access servers prior to 14.57. Attackers can send
an unauthenticated packet to a Secure Access server with load balancing
enabled, which results in the internal load balancer crashing. After a
successful attack, the Secure Access server is still able to accept
connections and is still able to issue a failover to connected clients. https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:L |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: require every boolean value to be defined
p_bools.nprim comes from the policy image independently of how many
booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at
value - 1, so a count larger than the values present leaves NULL entries.
Every user of that array then walks it by index and dereferences each
entry: cond_evaluate_expr() on the access-vector path,
security_get_bools() and security_get_bool_value() behind selinuxfs, and
security_set_bools(). A sparse class value is absorbed by
policydb_class_isvalid() and its siblings; booleans have no such
predicate, and no consumer that could use one.
Reject a boolean value that no boolean defines, once, where the array is
built. Conforming policies define every boolean they declare and are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist()
When a host issues an Identify command with CNS 07h (Active Namespace ID
List for a specific I/O Command Set), nvmet_execute_identify_nslist() is
called with match_css set. The command-set filter dereferences req->ns,
but this handler never calls nvmet_req_find_ns(), so req->ns is always
NULL (nvmet_req_init() resets it to NULL). As soon as an enabled
namespace with an NSID greater than the requested value exists,
req->ns->csi dereferences a NULL pointer and oopses.
Besides the crash, the comparison is logically wrong: to filter the list
by command set it must test the command set of the namespace being
iterated, not a single fixed value. Use the loop variable ns->csi. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: drop ESP-in-TCP packets with no ingress device
ESP-in-TCP receives records through the TCP strparser. handle_esp()
restores skb->dev from the saved skb_iif before passing the packet into
the XFRM input path.
Queued TCP data can be processed after the original ingress device has
been removed, for example during veth or net namespace teardown. In that
case dev_get_by_index_rcu() returns NULL. The XFRM IPv4 and IPv6 input
paths both expect skb->dev to be valid while building the route lookup,
so queued ESP-in-TCP data can dereference a NULL device.
Drop the packet if the saved ingress device can no longer be resolved.
Such a packet can no longer be routed through the normal XFRM receive
path, and this preserves the existing behaviour for packets whose ingress
device still exists. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: register input device after capabilities are set
input_register_device() exposes the device to userspace immediately.
In joycon_input_create() it was called before joycon_config_rumble()
configures the FF_RUMBLE capability and the memless force-feedback
device, so a concurrent EVIOCSFF could dereference a NULL dev->ff.
Registering early also means the initial udev event lacks button and
axis information, which can make input managers ignore the device.
Move input_register_device() to the end of joycon_input_create(), after
all capabilities, the IMU input device and the force-feedback callbacks
have been configured. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages
iommufd_ioas_change_process() iterates every IOAS area while only
holding every IOAS iova_rwsem, so it assumes every area has a non-NULL
pages pointer. That assumption can be false when it runs concurrently
with iopt_map_file_pages().
iopt_map_pages() executes in two phases. It first creates the area and
inserts it into the interval tree under iova_rwsem, with area->pages
still NULL. It then drops iova_rwsem and later fills area->pages
under domains_rwsem. This leaves a window between area creation and
area->pages fill where a concurrent iommufd_ioas_change_process()
can observe the area and dereference a NULL area->pages pointer,
leading to a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4b655067 P4D 4b655067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_fops_ioctl+0x287/0x400 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x120/0x170 fs/ioctl.c:583
x64_sys_call+0x1092/0x1fb0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x10a/0x680 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f4aec1a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f4aea3f6018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f4aec436090 RCX: 00007f4aec1a82bd
RDX: 0000200000000180 RSI: 0000000000003b92 RDI: 0000000000000003
RBP: 00007f4aec250295 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f4aec436128 R14: 00007f4aec436090 R15: 00007ffd04ef23e0
</TASK>
Modules linked in:
CR2: 00000000000000c0
---[ end trace 0000000000000000 ]---
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
Add a check to see if devm_kasprintf() is not NULL in
mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function
failed. |
