| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Ansible Operator Plugins. A low-privileged Kubernetes user can exploit a Jinja2 template injection vulnerability by crafting malicious custom resource (CR) specification values. These values are processed by Ansible without proper sanitization, allowing embedded Jinja2 expressions to be executed within the operator pod. This can lead to arbitrary code execution and privilege escalation, granting the attacker control over the operator's service account with cluster-wide permissions. |
| kqueue_fork_copy_knote() indexed into the child's file descriptor table using a knote's file descriptor number without a bounds check. Because the child's table is copied before knotes are transferred, a concurrent thread in the parent could grow the parent's table and register knotes with file descriptor numbers beyond the end of the child's table, causing an out-of-bounds read.
An unprivileged local user may be able to exploit these races to escalate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix possible invalid memory access after FLR
In the case that the first Function Level Reset (FLR) concludes
correctly, but in the second FLR the scratch area for the saved
configuration cannot be allocated, it's possible for a invalid memory
access to happen.
Always set the deallocated scratch area to NULL after FLR completes. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix read abandonment during retry
Under certain circumstances, all the remaining subrequests from a read
request will get abandoned during retry. The abandonment process expects
the 'subreq' variable to be set to the place to start abandonment from, but
it doesn't always have a useful value (it will be uninitialised on the
first pass through the loop and it may point to a deleted subrequest on
later passes).
Fix the first jump to "abandon:" to set subreq to the start of the first
subrequest expected to need retry (which, in this abandonment case, turned
out unexpectedly to no longer have NEED_RETRY set).
Also clear the subreq pointer after discarding superfluous retryable
subrequests to cause an oops if we do try to access it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: add missing netlink policy validations
Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink.
These attributes are used by the kernel without any validation.
Extend the netlink policies accordingly.
Quoting the reporter:
nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE
value directly to ct->proto.sctp.state without checking that it is
within the valid range. [..]
and: ... with exp->dir = 100, the access at
ct->master->tuplehash[100] reads 5600 bytes past the start of a
320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by
UBSAN. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: prevent buffer overflow in hid_hw_request
right now the returned value is considered to be always valid. However,
when playing with HID-BPF, the return value can be arbitrary big,
because it's the return value of dispatch_hid_bpf_raw_requests(), which
calls the struct_ops and we have no guarantees that the value makes
sense. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Open-code GGTT MMIO access protection
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
(cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: check for zero length in DecodeQ931()
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: add bounds check for if_id in IRQ handler
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root. |
| JuggleIM im-server through 1.8.16 ships default administrator credentials admin/123456 that allow unauthenticated remote attackers to access the admin console on port 8090. Attackers can log in as administrator, even after account deletion since CheckLogin recreates it, to control tenant applications and app secrets. |
| libmodplug through 0.8.9.1 contains a heap-based out-of-bounds read vulnerability in CSoundFile::ReadAMS2() in src/load_ams.cpp that allows attackers to read adjacent heap memory via crafted AMS files. Attackers can supply an AMS module whose pattern effect bytes keep bit 7 set, driving the decoder past the input buffer and crashing any libmodplug consumer. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data. |
