| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authentication bypass using an alternate path or channel vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Progress MOVEit Transfer (Ad Hoc module).
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| Incorrect Authorization vulnerability in Progress MOVEit Transfer (Client Certificates module).
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to DOM-Based Cross-Site Scripting via the 'redirect_url' parameter in versions up to, and including, 4.0.8 This is due to insufficient input validation in the Topbar component's back button handler. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute in the victim's browser whenever the victim accesses a page that includes the malicious payload. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix _gaccess_shadow_fault()
In some circumstances, it is possible that the page of nested guest
memory that is being shadowed is not present at all in the parent guest
gmap. dat_entry_walk() will not find any leaf entry and return with
-ENOENT, which will erroneously be propagated all the way to userspace.
Fix by manually calling gmap_link() on the memory of the nested guest
that is being shadowed if the mapping was not already present. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd_zbc: Reject disks with too many zones
sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and
stores the result in the unsigned int nr_zones field of struct
zoned_disk_info, silently truncating counts that exceed 32 bits. The
truncated count is later used to size per-zone resources, while the device
may still report more zones than fit.
Moreover, sd_zbc_report_zones() counts the reported zones with a signed int
zone_idx, which overflows past INT_MAX. Reject devices reporting more than
INT_MAX zones at scan time; such a device is not realistic for any medium
that exists today, and accepting it produces inconsistent zone bookkeeping. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump()
When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP
without freeing its skb argument. This leaks the cloned skb and also
prevents nxp_set_ind_reset() from being called to perform recovery.
Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC))
call with IS_ENABLED(CONFIG_DEV_COREDUMP). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Restrict CO-RE poisoning to relocatable instructions
CO-RE relocation records can name any instruction offset. When a
relocation cannot be resolved, bpf_core_patch_insn() currently poisons its
target before checking whether that instruction is a valid relocation
target. Malformed metadata can therefore replace jumps, calls, exits,
register-source arithmetic, or non-immediate loads instead of failing at
the relocation step.
Handle poisoning only after the instruction has passed the same class and
operand-form checks used for a resolved relocation. Route invalid forms
through the existing diagnostic and return a hard error. Keep poisoning
supported instructions, including both halves of a plain ldimm64, so an
unresolved relocation in dead code remains valid.
Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return
its status directly from each validated instruction case. This avoids
routing the success path through a common label and leaves the helper free
to report errors.
The shared relocation code applies this restriction to both libbpf and
in-kernel CO-RE. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid livelock while updating retransmit path
sctp_assoc_update_retran_path() can loop forever when every remaining
transport, including retran_path, is SCTP_UNCONFIRMED: the state check
runs before the wraparound test, so the loop cannot observe that it has
completed a full pass.
Fix this by considering a transport only when it is not UNCONFIRMED,
then checking whether the walk has returned to retran_path. This makes
the full-pass termination independent of the transport state while
preserving the existing fallback selection semantics.
Also restore the NULL guard around the retran_path assignment. In the
all-UNCONFIRMED case there is no eligible replacement transport, and
installing NULL would leave later retransmit-path users and the debug
print with a NULL path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate received frame size
st21nfca_hci_i2c_repack() trims a received frame at its EOF marker
before removing byte stuffing. It then assumes the truncated frame
contains the LLC header and two CRC bytes, and it unconditionally reads
the byte after an escape marker.
A malformed frame can place EOF immediately after the start marker or can
end its data portion with an escape marker. The former leaves too few
bytes for check_crc(), while the latter makes the unstuffing loop read past
the current skb length.
Require the minimum framing bytes both before and after unstuffing. Use
separate input and output cursors while removing byte stuffing, and reject
an escape marker without its encoded byte. This keeps malformed frames
within the received frame boundary before CRC processing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: clear stale buf->page after recycling on skb build failure
In stmmac_rx(), when napi_build_skb() fails the descriptor page is
recycled back to the page pool with page_pool_recycle_direct(), but
buf->page is left pointing at the recycled page, unlike every other
consumption site in the function which clears the pointer after handing
the page away.
With the stale pointer stmmac_rx_refill() skips the replacement
allocation and programs the already-recycled page back into the RX
descriptor.
Clear buf->page on the napi_build_skb() failure path to keep the buffer
lifecycle consistent with the other consumption sites. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO
gve_can_send_tso() computes how many buffers each segment of a GSO
packet would span, and for this it needs the length of the headers
that the device replicates in front of every segment.
It unconditionally uses skb_tcp_all_headers(), which reads the doff
field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header:
tcp_hdrlen() then reads one byte of the UDP payload, and header_len
can be anything in [0, 60] instead of the transport offset plus the
eight bytes of the UDP header that gve_prep_tso() programs into the
TSO context descriptor.
A wrong header length shifts all the segment boundaries computed in
the loop, so the number of buffers per segment can be over or under
estimated. In the first case, GSO is needlessly disabled for this
packet by gve_features_check_dqo() and the stack has to segment it.
In the second case, the driver hands the device a packet whose
segments span more than GVE_TX_MAX_DATA_DESCS buffers.
Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what
gve_prep_tso() does. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not let ipv6_find_hdr() return an offset past the packet end
ipv6_find_hdr() walks the extension header chain, skipping each header by
the length that header itself declares. ipv6_optlen() returns up to 2048,
and the skip is never checked against skb->len, so the offset stored in
*offset can point past the end of the packet.
openvswitch installs that offset as the transport header, and
update_ipv6_checksum() then reads and writes the transport checksum field
out of bounds:
BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470
Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629
CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348
Call Trace:
inet_proto_csum_replace16+0x445/0x470
set_ipv6_addr+0x3dd/0x460
do_execute_actions+0x6a3d/0x7c40
ovs_execute_actions+0xfd/0x480
ovs_packet_cmd_execute+0xc38/0xf20
genl_rcv_msg+0x59e/0x870
netlink_rcv_skb+0x18b/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x6bc/0xa20
The buggy address belongs to the object at ffff88810b754980
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 390 bytes inside of
freed 704-byte region [ffff88810b754980, ffff88810b754c40)
Other callers use that offset too, so bound it here rather than in one
caller.
Reject a header whose declared length does not fit in the packet.
ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this
adds no new failure mode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix bridge reference leak in nv1a_ram_new()
pci_get_domain_bus_and_slot() takes a reference to the PCI device,
which is never released once the memory size has been read from its
config space. Drop the reference before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
damon_hugetlb_mkold() reads the page table entry into a local variable,
unsets the accessed bit in the variable, and updates the page table entry
with the updated variable value. If hardware updates the same page table
entry in parallel, the hw updates could be lost. For example,
hardware-updated dirty bits might be lost.
Avoid the parallel updates by clearing the page table entry when reading
it together, using huge_ptep_get_and_clear(). If a parallel write to the
memory is made after the clearing, the hw will see the page table entry is
cleared, trigger page fault and wait until it is handled. The page fault
handling will wait for damon_hugetlb_mkold() due to the page table lock.
Because hugetlbfs is an in-memory file system and hugetlb pages cannot be
reclaimed, no critical issue is expected to my best knowledge. But
definitely this is a nasty bug that should be fixed sooner rather than
later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce()
The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an
invalid offset to hid_field_extract(), resulting in memory reads at
incorrect addresses -- possibly beyond the end of the report. If a
field in the HID descriptor lists more usages than its Report Count
actually reserves space for, the function's inner 'j' will walk past
the end of the field:
for (i = 0; i < report->maxfield; i++) {
for (j = 0; j < report->field[i]->maxusage; j++) {
...
value = hid_field_extract(hdev, raw_data + 1,
offset + j * size, size);
A descriptor listing 12288 usages against Report Count 1 has the loop
extract the usage at index 12287 from bit offset 98296 -- about 12 KB
past a 2-byte received report. The value is stored in
wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event,
making this an information disclosure.
Clamp the loop to field->report_count, the number of value slots the
report holds. Value slots past the last declared usage are still
scanned; they reuse that usage (HID 1.11, 6.2.2.8).
Verified on v6.12.105 with a UHID reproducer: a 2-byte report from
such a descriptor trips KASAN before the patch and not after it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical. |
| The PickPlugins Product Designer for WooCommerce WordPress plugin through 1.0.40 does not perform any capability check and its nonce verification is inverted, accepting requests with an invalid or absent nonce while rejecting valid ones, and it does not validate the post the data is written to, allowing unauthenticated users to insert design template data into the metadata of any post on the site. |
| The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.8.18 via the ai_wp_footer_hook. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract sensitive data including the server's internal IP address, PHP configuration, WordPress and theme versions, hardening constants, the plugin's full block matrix, and all post meta values including underscore-prefixed protected keys such as API tokens and private integration state written by other plugins. |
| Heap-based buffer overflow in Windows NTFS allows an authorized attacker to elevate privileges locally. |
