| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Newell Brands DYMO ID 1.5.1.71 parses job files using XmlDocument.Load() without disabling DTD processing. The PC Job Files view automatically parses every recognized job file extension on folder browse. A crafted file on any browsed network share can perform SSRF, capture NTLMv2 credentials, read local files, or crash the process. Fixed in 1.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.DX4 when a
delivery to a local address of the node reaches the socket lookup.
For example, a UDP socket bound to the enslaved ingress interface
does not receive any of the decapsulated packets, while an unbound
socket outside the VRF does.
This contradicts Documentation/networking/vrf.rst: by default the
scope of an unbound UDP or TCP socket is limited to the default VRF.
Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does
the same for IPv6. The socket lookup then matches the decapsulated
packet like any other packet received on that enslaved interface. Such
a packet matches an unbound UDP or TCP socket only when
udp_l3mdev_accept or tcp_l3mdev_accept is set. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that a user is authorized to read a gallery before rendering it, allowing authors to embed and expose other users' non-public gallery metadata to unauthenticated visitors. |
| iFlytek Astron Agent through 1.1.2 contains an insecure direct object reference vulnerability that allows authenticated applications to resume other applications' paused workflows by supplying their event_id to POST /workflow/v1/resume. Attackers can predict Snowflake event IDs to inject resume content into victim workflows and read their continuation output stream, breaking cross-tenant isolation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: initialize inode mapping flags for cached inodes
[BUG]
When running generic/795 with 8K block size, 4K page size, the test
always fails, triggering some ASSERT()s related to folio size:
795 (241074): drop_caches: 3
assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0)
------------[ cut here ]------------
kernel BUG at extent_io.c:1404!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs]
Call Trace:
<TASK>
btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
iter_file_splice_write+0x31a/0x540
direct_splice_actor+0x53/0x170
splice_direct_to_actor+0xe9/0x240
do_splice_direct+0x76/0xb0
vfs_copy_file_range+0x1fd/0x630
__x64_sys_copy_file_range+0xf9/0x220
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The ASSERT() itself is added by a later patch.
The crash is triggered with that new debug patch, and without this fix.
[CAUSE]
In the above case, the start 16826368 is properly 8K aligned, but the
end (16830463 + 1) is not 8K aligned.
Furthermore the mapping's minimal folio order is 0, not the expected 1
for 8K block size with 4K page size.
So this means some inodes do not have btrfs_set_inode_mapping_order()
called on it.
The missing btrfs_set_inode_mapping_order() call happens for cached
inodes, through the following events:
- btrfs_create_new_inode() called for inode X
Which properly sets minimal folio order for the VFS inode.
- btrfs_update_inode() called for inode X
Which calls btrfs_delayed_update_inode() to create a delayed_node
into root->delayed_nodes xarray.
- Drop cache/memory pressure, evicting in-memory inode X
Which evicted the inode X, but delayed_node is still in
root->delayed_nodes for future reuse.
- btrfs_iget() for inode X called again
btrfs_iget()
|- btrfs_iget_locked()
| |- iget5_locked_rcu()
| Which creates a new vfs_inode for btrfs, whose mapping still
| has the minimal order as 0.
|
|- btrfs_read_locked_inode()
|- btrfs_fill_inode()
| |- btrfs_get_delayed_node()
| Which found out the previous node, and use that delayed
| node to initialize the new inode.
|
|- filled = true;
|- if (filled) goto cache_index;
Which skips the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls.
So the inode still has minimal folio order set as 0, not
the required 1.
Thus later page cache read will get a folio whose size is smaller than
block size, as the mapping has its minimal folio order set as 0 not 1,
then trigger the ASSERT().
[FIX]
Move the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls under cache_index label,
so that the mapping flags and minimal folio order is always set
no matter if we have a cached inode. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: initialise workingset state before folio split
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state. |
| Executable Regular Expression Error vulnerability in WP Media WP Rocket wp-rocket allows Code Injection.This issue affects WP Rocket: from n/a before 3.23.5. |
| Use of Client-Side authentication vulnerability in Hayat Health Facilities Inc. (Hayat Hospital) Hayat Mobile allows Authentication Bypass.
This issue affects Hayat Mobile: from 3.3.0 before 3.4.0. |
| Wukong AICRM through 20260610 contains a missing authorization vulnerability that allows authenticated users to write into other users' AI chat sessions by supplying an arbitrary sessionId to POST /chat/send. Attackers can append messages to a victim's conversation and receive streamed assistant replies built from the victim's last 20 messages, disclosing conversation content. |
| Easy!Appointments through 1.6.0 contains an authorization bypass vulnerability in Booking::register() that allows unauthenticated attackers to modify any appointment by supplying an appointment id without its hash. Attackers can enumerate sequential appointment ids with a self-asserted manage_mode flag to rewrite appointment details, rebind them to attacker-controlled customers, and obtain management hashes for rescheduling or cancellation. |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that an image identifier added to a gallery refers to a media attachment the caller is permitted to view, allowing any user able to create and edit a gallery (Author and above by default) to disclose the title and excerpt of other users' private, draft, pending and trashed posts that WordPress would otherwise withhold from them. |
| A vulnerability in the Python interpreter of Cisco NX-OS Software could allow an authenticated, local attacker with low privileges to escape the Python sandbox and gain unauthorized access to the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by manipulating specific functions within the Python interpreter. A successful exploit could allow an attacker to escape the Python sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.1, readJSON in internal/bodyprocessors/json.go can stop its bounded flattening walk after reaching SecArgumentsLimit or the byte budget and then call gjson.Valid on the complete raw body. An unauthenticated attacker can submit shallow values followed by an extremely deeply nested JSON tail that was not visited by the bounded walk, causing gjson.Valid to recurse without a depth bound and terminate the hosting process with an unrecoverable fatal stack overflow. The ProcessRequest and ProcessResponse JSON paths share the affected readJSON validation flow, and the payload can remain within recommended body-size and argument-count limits. This issue is fixed in version 3.8.1. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.0, ProcessResponse in internal/bodyprocessors/json.go passes the ignoreJSONRecursionLimit value of -1 to readJSON, while the recursive guard only stops at zero. A network attacker who can cause an application protected by Coraza to return deeply nested JSON can make response-body processing perform quadratic work, consuming one CPU core for seconds per response within the default ResponseBodyLimit. Request JSON processing is not affected by this specific path because it uses the configured request recursion limit, and exploitation requires response-body inspection to be enabled. This issue is fixed in version 3.8.0. |
| JeecgBoot through 3.9.5 contains an insecure direct object reference vulnerability that allows authenticated users to delete other users' AI video generation records by supplying arbitrary userId values to DELETE /airag/video/deleteVideoRecord. Attackers can obtain record ids from the unchecked GET /airag/video/listByUser endpoint and delete victims' Redis-stored video history entries one record per request. |
| JeecgBoot through 3.9.5 contains an authorization bypass vulnerability in the getVideoRecords handler of VideoGenerationController that allows authenticated users to read other users' records via the userId parameter. Low-privileged attackers can supply another user id to retrieve their AI video generation history, including prompts, task ids, video URLs and cover URLs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't allow injecting frames wider than the chanctx
Frames injected on a monitor interface can carry a radiotap
field requesting a bandwidth, which mac80211 passes down to
the driver regardless of the the actual operational bandwidth.
If the bandwidth requested is too wide, that triggers a warning
in hwsim:
WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw))
Drop such frames entirely instead since they cannot be sent. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO header length truncation
stmmac_tso_xmit() stores the protocol header length returned by
stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits
headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo
256 (486 becomes 230, 256 becomes 0).
A TCP over IPv6 socket carrying a few hundred bytes of sticky
destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255
while staying below the 1023-byte limit, so such an skb reaches
stmmac_tso_xmit().
Widen proto_hdr_len to unsigned int, which is sufficient since the value
is bounded by the hardware limit, and adjust the debug print specifier
accordingly. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in SysAnnouncementSendController that allows authenticated users to modify other users' message delivery records. Attackers can obtain delivery ids from GET /sys/sysAnnouncementSend/list and submit edit requests that overwrite read flags, recipient ids, or linked announcements to hide messages from recipients. |
