| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| On affected Arista access points with Wireless Intrusion Prevention System (WIPS) active, an unauthenticated attacker within radio frequency (RF) proximity can send a crafted frame to crash the sensor service, disabling WIPS monitoring on the access point, or potentially achieve remote code execution. No wireless association or authentication is required. |
| A vulnerability in the web-based user interface of Cisco License On-Prem, formerly Cisco Smart Software Manager On-Prem (SSM On-Prem), could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system.
This vulnerability is due to improper validation of user-supplied content within configurations that are submitted to the web-based management interface. An attacker could exploit this vulnerability by updating configurations within the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.
To exploit this vulnerability, the attacker must have valid administrative credentials. Because only an attacker who already holds system administrator privileges can exploit the vulnerability, the only additional privileges gained include the ability to turn off the system, which an administrative user could not normally do. |
| The Nickname profile can panic with an out-of-bounds slice error when transforming crafted input into a short destination buffer. |
| Insufficient API bounds checking in phalFelica in NXP NXPNfcRdLib RC663 through 07.14.00_Pub may allow an attacker with privileges or an untrusted third party to access unintended memory regions, potentially leading to limited loss of confidentiality, integrity, and availability. All software versions from 07.18.00 onwards have fixed this problem. |
| The SecuShare Pro developed by Openfind has an OS Command Injection vulnerability. Unauthenticated remote attackers can inject arbitrary OS commands and execute them on the server. |
| OS Command Injection in the login.xgi CGI endpoint in Iskratel Innbox GPON ONT devices allows an unauthenticated remote attacker to execute arbitrary commands as root via the CLI parameter. |
| @enmaso/node-convert through 1.0.0 contains an OS command injection vulnerability in convert.js that allows attackers to execute shell commands via unsanitized filepath and convertTo arguments. Attackers can inject shell metacharacters or a single quote into the ImageMagick command run by child_process.exec() to execute operating system commands with Node.js process privileges. |
| A command injection vulnerability in the Active Directory Events Listener of Tenable Identity Exposure (SaaS) allows an authenticated, low-privileged attacker to execute arbitrary commands as SYSTEM on the PDCe. |
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. |
| An authenticated high privilege user can inject arguments in troubleshooting commands resulting in privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in cat() in ntfscat.c that allows an attacker to corrupt heap memory in the ntfscat binary by crafting a malicious NTFS image. The overflow is triggered by reading a file. |
| A flaw was found in 389-ds-base. A remote, authenticated attacker could exploit a vulnerability in the Simple Authentication and Security Layer (SASL) UNBIND process. By sending a specially crafted request, the attacker can cause a connection to stall, leading to resource exhaustion and a Denial of Service (DoS) for the server. |
| Buffer Overflow vulnerability in GifLib Project GifLib v.5.2.1 allows a local attacker to obtain sensitive information via the DumpSCreen2RGB function in gif2rgb.c |
| vim is vulnerable to Heap-based Buffer Overflow |
| vim is vulnerable to Heap-based Buffer Overflow |
