| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: bail out of setup if the controller is inaccessible
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it. |
| NVIDIA vGPU Virtual GPU Manager for Linux contains a vulnerability where an attacker could cause incorrect resource transfer between spheres. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel module where a user could cause improper locking. A successful exploit of this vulnerability might lead to denial of service. |
| Werkzeug is a comprehensive WSGI web application library. Prior to 3.1.9, the safe_join function used by send_from_directory can allow a NUL: special-device path because safe_join checks the Windows device name without first removing an empty NTFS ADS marker. The trigger is that an application runs on Windows with NTFS and serves a user-specified path ending in a special device name such as NUL:. The attack mechanism is that a requested path ends in a Windows special device name with an empty ADS marker. The impact is that the special device opens successfully and the file read hangs indefinitely. This issue is fixed in version 3.1.9. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields when recycling rhtab elements
rhtab_map_update_existing() and rhtab_delete_elem() call
bpf_obj_free_fields() when replacing or deleting a value. These map
operations can run from BPF programs in NMI context, where releasing a
referenced kptr or another complex field is not generally safe.
Array and hash maps avoid that problem by cancelling only the asynchronous
fields which can be stopped safely in the caller context. Other ownership
state remains attached to the allocation until its memory allocator
destructor performs the final cleanup.
Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This
cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to
release referenced kptrs when the allocation is eventually destroyed.
[ kkd: Rebased, used direct helper calls, and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| Multiple BinSoft products are vulnerable to Remote Command Execution. An authorized user with access to the application and direct access to the backend database can achieve system command execution by uploading an attachment and modifying its storage path in the database to reference an attacker-controlled remote network resource. Alternatively, it is possible to use a previously uploaded file and change its reference. When the application processes the attachment, and a user tries to open it, the referenced resource is executed by the system.
Critically, this vulnerability can be exploited by any unauthenticated attacker by chaining it with CVE-2026-40550 and CVE-2026-40551, which allows obtaining database access, and logging onto any account.
The described issue affects all published versions. The vendor stated that this issue is a direct result of the architecture model in which the software is distributed, and that it will be mitigated with a corrected installation manual. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SMTP MIME parser in rust/src/mime/smtp.rs does not fully reset state when processing Content-Type: message/rfc822 encapsulation. An outer MIME part's encoding or filename state can leak into the inner message, allowing crafted mail to evade detections based on file.data, file.name, or extracted URLs when SMTP MIME decoding is enabled. This issue is fixed in version 8.0.6. |
| Ghidra before 12.1.4 fails to validate the TYPE_COL byte in OptionsDB.createUnregisteredOption(), causing an ArrayIndexOutOfBoundsException that leaves domain objects permanently locked. Attackers can craft a malicious program database file that, when imported, causes the application to stall and prevents resource cleanup or graceful shutdown. |
| Improper Exposure of Resource to Wrong Sphere in the host file helper (gofer) in Google gVisor prior to commit 573a9e73cf844f on Linux platforms with CUSE enabled allows a local attacker with container image deployment privileges to achieve root code execution on the host system. By including a /dev/cuse character device node in a container image, opening the device passes through to the host, allowing the sandboxed attacker to register a host device and exploit CUSE unrestricted ioctl handling to overwrite root udev helper memory. |
| On Windows, PHP's filesystem and stream APIs do not reject reserved device names such as CON, PRN, AUX, NUL, COM1 to COM9, LPT1 to LPT9, CONIN$ and CONOUT$ when they appear as a component of a path. An attacker-controlled filename therefore reaches CreateFileW() and opens a device instead of the regular file the application expected, which can block or hang the request and exhaust worker processes. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
net: net_failover: Fix the deadlock in net_failover_slave_name_change()
This is a sibling fix of commit
b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register").
There is netdev_lock_ops() in the upper callers, so using netif_open()
instead of dev_open().
Call Trace:
__schedule+0x2bb/0x650
schedule+0x27/0xb0
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_open+0x3b/0xe0
net_failover_slave_name_change+0x22/0x40
failover_event+0xd4/0x1e0
notifier_call_chain+0x62/0xf0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x50/0x80
netif_change_name+0x200/0x330
do_setlink.isra.0+0xb12/0xdf0
? security_capable+0x9a/0x1e0
? ns_capable+0x31/0x60
rtnl_setlink+0x302/0x670
? netlink_recvmsg+0x296/0x340
? security_capable+0x9a/0x1e0
? __pfx_rtnl_setlink+0x10/0x10
rtnetlink_rcv_msg+0x384/0x460
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x61/0x120
rtnetlink_rcv+0x15/0x30
netlink_unicast+0x28f/0x3c0
netlink_sendmsg+0x216/0x450
__sys_sendto+0x222/0x230
__x64_sys_sendto+0x24/0x40
x64_sys_call+0x1d5d/0x2390
do_syscall_64+0x105/0x5a0
? do_syscall_64+0x140/0x5a0
? exc_page_fault+0x94/0x1e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event->pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: initialize gigantic bootmem hugepage struct pages earlier
Gigantic bootmem HugeTLB pages are currently initialized from
hugetlb_init(), but page_alloc_init_late() runs earlier and walks
pageblocks to determine zone contiguity.
If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can
observe still-uninitialized struct pages through
__pageblock_pfn_to_page(). This may not trigger an immediate failure, but
it can make set_zone_contiguous() compute the wrong zone contiguity state.
If extra poisoned-page checks are added in this path, such as
PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot
panic.
Initialize gigantic bootmem HugeTLB struct pages from
page_alloc_init_late(), before zone contiguity is evaluated, so later page
allocator setup only sees valid struct page state. This also makes the
initialization order more natural, as struct pages should be initialized
before later code inspects them. |
