| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also not robust against other
KVM bugs, though that's kind of a moot point since any such bugs would show
up even if sev->active is never set. I.e. KVM must get that side of things
correct. But, that's not a great reason to add more code just to make
things marginally less robust. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
Three related problems exist in the handling of KVM interrupt and page
resources when a queue is removed from the host's AP configuration
while assigned to a mediated device (mdev).
Problem 1:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue()
When the AP bus removes a queue device whose adapter or domain has
been removed from the host's AP configuration,
vfio_ap_mdev_remove_queue() is called. If the queue is still in the
host's AP configuration at that point, it calls
vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the
adapter is already gone from the host configuration, ap_zapq() returns
AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in
vfio_ap_mdev_reset_queue()'s switch statement and falls through to
the default case, which issues a WARN but does not call
vfio_ap_free_aqic_resources(). As a result, if IRQ handling was
enabled for the queue by the guest, the KVM GISC registration and
the pinned guest page holding the notification indicator byte (NIB)
are both leaked.
This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as
AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in
vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL
indicates the queue is not operational and no further reset attempts
are possible; the correct action is to free the IRQ resources
immediately.
Problem 2:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check()
In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue
reset has not yet completed, in which case apq_reset_check() is queued to
a work queue to verify completion of the reset operation. This function
uses the PQAP(TAPQ) function to get the queue's status and calls
apq_status_check() to verify whether the reset has completed, failed or
needs to be executed again. As described in Problem #1 above,
apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL,
thereby potentially leaking KVM GISC registration and the pinned guest page
holding the NIB.
This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to
apq_status_check() and returning -ENODEV for that case. The caller,
apq_reset_check() will then check for this return code and call
vfio_ap_free_aqic_resources() to prevent the leak.
Problem 3:
~~~~~~~~~
vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL
vfio_ap_free_aqic_resources() guards the call to
kvm_s390_gisc_unregister() with:
if (q->saved_isc != VFIO_AP_ISC_INVALID &&
!WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm)))
If matrix_mdev->kvm is NULL -- which can happen when
vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a
subsequent cleanup path reaches this function -- the WARN_ON fires
and the entire block is skipped. This leaves q->saved_isc set to a
non-invalid value, creating a potential double-free on any subsequent
call to this function.
When kvm is NULL the KVM guest is already torn down, so
kvm_s390_gisc_unregister() need not and cannot be called; however,
q->saved_isc must always be cleared. Fix this by separating the
kvm_s390_gisc_unregister() call from the q->saved_isc reset. The
WARN_ON now guards only the genuinely impossible case of matrix_mdev
being NULL. A NULL kvm is handled gracefully by skipping only the
unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set
unconditionally whenever saved_isc was not already invalid.
Additionally, add an else clause to the host-config check in
vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources()
directly when the queue is not in the host's AP configuration. This
serves as a backstop: when the AP bus fires the driver .remove
callback after an adapter is removed from the host config, the queue
is by definition no longer addressable, so vfio_ap_mdev_reset_queue
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix missing device lock in zpci_report_status()
When pdev is non-NULL, zpci_report_status() accesses the device's driver.
To get a consistent state matching the recovery, the device lock needs to
be held. Do so by expanding the existing device lock critical section.
The lock only needs to be held when the pdev is non-NULL, so extract
the pdev-specific reporting into a helper function which also adds a
lockdep assertion to detect calls without the device lock held. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and
cpc->task_epc is only non-NULL while a task context is scheduled in on
this CPU. __perf_pmu_sched_task() therefore always passes NULL:
Unable to handle kernel NULL pointer dereference at virtual address 00
pc : armv8pmu_sched_task+0x14/0x50
Call trace:
armv8pmu_sched_task+0x14/0x50 (P)
perf_pmu_sched_task+0xac/0x108
__perf_event_task_sched_out+0x6c/0xe0
Pass &cpc->epc instead, the CPU-wide context for this PMU, which the
function already dereferences a few lines up to find pmu.
armv8pmu_sched_task() is the only in-tree implementation that
dereferences the argument, and it only reads ->pmu, so the oops needs
BRBE, added in v6.17. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Keep internal commands dispatchable during error handling
Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
switched UFS internal commands to allocate requests on
hba->host->pseudo_sdev->request_queue, which shares the host tagset with
regular LUNs.
During error recovery, ufshcd_err_handling_prepare() calls
blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the
tagset as quiesced, including pseudo_sdev->request_queue. When
ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP
OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the
quiesced queue, resulting in an unrecoverable circular wait deadlock.
Keep quiescing the tagset and unquiesce the pseudo SCSI device on top of
that, so internal commands stay dispatchable while the logical units remain
quiesced. Re-quiesce the pseudo device before unquiescing the tagset so
that quiesce_depth stays balanced.
Clock scaling and ufshcd_pause_command_processing() are unaffected: they
keep quiescing the whole tagset, internal commands included. |
| SparkyFitness is a self-hosted, AI-powered health and fitness tracker for families. Prior to 1.6.0, the api/admin/backup/restore endpoint interpolates an uploaded filename into a shell command. An authenticated global administrator uploads a restore archive with a crafted filename. The administrator can supply a restore archive with a filename containing shell metacharacters. Successful exploitation can execute arbitrary operating-system commands with the server process privileges. This issue is fixed in version 1.6.0. |
| A flaw was found in curl. A remote malicious server can trigger a denial of service (DoS) in cookie handling by providing an overly long cookie name and value that exceeds curl's line-length limit when saved to a cookie file. Subsequent curl operations reading from this cookie file silently abort parsing upon encountering the oversized entry, causing all remaining valid cookies in the file to be ignored. |
| A flaw was found in curl. A remote malicious server can cause a Denial of Service (DoS) or memory corruption in applications that enable File Transfer Protocol (FTP) wildcard matching. When a wildcard listing operation fails, curl does not properly reset its internal callback handlers before the connection handle is reused or duplicated. An application that subsequently reuses or clones this corrupted handle may experience an immediate application crash or unsafe memory access. |
| A flaw was found in curl. When handling Trivial File Transfer Protocol (TFTP) transfers, a malicious server can trigger information disclosure by responding to a download request in a way that forces the client into transmit mode. Consequently, the client may unintentionally send leftover sensitive data from prior operations on a reused connection handle to the attacker's server. |
| A vulnerability was detected in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. This issue affects the function Exam::startExam of the file exam.php of the component Exam Module. The manipulation of the argument topicid results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Disable device buffer exporting
Device buffers are never intended to be exported. Disable exporting
support explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: iris: fix runtime PM reference leaks
Use pm_runtime_resume_and_get() in iris_enable_power_domains()
to avoid leaking a runtime PM usage count on failure.
Also ensure pm_runtime_put_sync() is always called in
iris_disable_power_domains(), even when iris_opp_set_rate()
fails, so runtime PM references remain balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up processing both again but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels or run NAT and adds the
new extension for that breaking the pointer in the expectation
list causing UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where we need to process both clones without
modifications in the same zone. So, let's just reset the entry in
case for some reason we got an skb with a shared one. This doesn't
affect any known use cases, but avoids any potential problems with
sharing and modification of the unconfirmed ct entry.
Unlike openvswitch module, act_ct allows for NAT without commit.
Changing that would be a uAPI break. So, act_ct needs to reset on NAT
regardless of the commit flag to avoid reallocation of the extension
space. This, however, doesn't really change the picture for sensible
networking cases as there should be no need to run the same packet
twice (before and after the clone) through conntrack without packet
header or zone changes and without commit.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't let hidden_space go negative in xfs_metafile_resv_init
LOLLM points out that if the amount of fdblocks that we can reserve for
a metadata btree file goes below the space already used by that file,
then the hidden_space subtraction can underflow, causing
xfs_dec_fdblocks to subtract a huge amount of space. We never want the
target to be less than the used sapce, so fix the logic that adjusts
dblocks_avail downwards.
Also fix an error in the adjacent comment. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots
LOLLM noticed that the inode btree root formatting methods copy too many
bytes -- there's only one set of keys in node blocks, not two. This
causes memory corruption of whatever's beyond the buffers. |
| A flaw was found in curl. When the command-line tool is executed with the remote header name option to prevent overwriting existing files, a malicious server can bypass this protection by returning an intermediate HTTP 103 (Early Hints) response or through specific header ordering. This flaw allows an attacker controlling a remote server to overwrite existing local files on the client system. |
| Use after free in Windows Composite Image File System allows an authorized attacker to elevate privileges locally. |
| The Ignition Perspective module does not properly validate session privileges when determining Designer-level access. An authenticated user with access to a Vision project could provide their valid Vision session identifier and gain Designer-level privileges. An attacker could exploit these elevated privileges to execute arbitrary code in the context of the Ignition Gateway process. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and the root directive or access log format references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
