| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sylius versions before 1.12.25, 1.13.17, 1.14.20, 2.1.16, and 2.2.9 build administrator password-reset links using the request Host header without validation, allowing unauthenticated attackers to redirect reset tokens to attacker-controlled domains. Attackers can request password resets for known administrator email addresses with forged Host headers to intercept valid reset tokens and take over administrator accounts. |
| Reliance on Obfuscation or Encryption of Security-Relevant Inputs without Integrity Checking vulnerability in danielberkompas cloak allows an attacker with write access to stored ciphertext to make it decrypt to a chosen value via bit flipping.
Cloak.Ciphers.AES.CTR encrypts with AES-256 in CTR mode and stores the key tag, the IV and the ciphertext with no MAC. decrypt/2 checks only the key tag and the minimum length before it returns the plaintext, and Cloak.Ciphers.Deprecated.AES.CTR decrypts the legacy format the same way. CTR is a stream cipher, so a value XORed into the stored ciphertext is XORed into the plaintext at the same offset. An attacker who can write to the encrypted store (for example through SQL injection or a compromised replica) and who knows or can guess a stored plaintext can replace it with any value of the same length. The application receives that value with no error.
This issue affects cloak: from 0.1.0-pre onward. |
| GetSimple CMS is a content management system (CMS), and GetSimple CMS CE is the community edition of that CMS. In version 3.3.22, the password reset endpoint can be accessed without authentication. When a reset request is submitted for an existing user, the application generates a new temporary password and immediately stores its hash as the user's new password. The temporary password is generated using PHP rand() seeded with microtime(). Because this seed is time-based and has a limited effective search space, an attacker can generate possible reset password candidates. Since the admin login endpoint does not enforce rate limiting or account lockout, these candidates can be tested online until the correct password is found. Successful exploitation may lead to administrator account takeover. At time of publication, there are no publicly available patches. |
| ZITADEL 4.x before 4.17.3 and 3.x through 3.4.15 protects IdP intent tokens with unauthenticated, malleable encryption, allowing authenticated users to tamper with their own token so it is accepted for another user's external login intent. An attacker who predicts a victim's in-flight intent identifier and wins a timing race can call /v2/idp_intents or /v2/sessions to steal the victim's IdP tokens or hijack their session. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's URL normalization does not recognize dot and dotdot path segments when they carry semicolon parameters. A request such as /user/..;foo=bar/admin is therefore not canonicalized to /admin even when path normalization is enabled. If an upstream interprets the segment according to RFC 3986 while Envoy applies routing or RBAC to the uncollapsed path, a remote client can cause path confusion and bypass path-based security policy. The relevant scope boundary is that the security consequence depends on a downstream/upstream path interpretation mismatch or a path-based Envoy decision. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| A security vulnerability has been detected in Netcore POWER13 2.0.240730.162638. This issue affects the function routerd.passwd_set of the file /ubus. Such manipulation leads to weak password recovery. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Payments for Hubtel WordPress plugin before 1.0.2 does not verify that payment notifications received by its payment callback come from the payment provider, allowing unauthenticated attackers to mark arbitrary orders as paid without payment. |
| Gladys Assistant before 5.1.0 contains a password reset link poisoning vulnerability that allows unauthenticated remote attackers to obtain valid password reset tokens for any account by exploiting the client-supplied origin parameter in the forgot_password endpoint without server-side validation. Attackers can send a crafted request specifying an attacker-controlled origin, causing the victim to receive a poisoned reset link that discloses the session token to the attacker, enabling full account takeover including administrator accounts. |
| Use of Non-Canonical URL paths for authorization decisions vulnerability in Apache APISIX.
In some configurations where a permissive route overlaps a protected one, a crafted encoded path can reach an upstream endpoint that the matched route's policies were never meant to cover. AÂ request that should have been rejected is served instead, giving unauthenticated access to a protected upstream endpoint. This issue affects Apache APISIX: from 2.14.1 through 3.18.0.
Users are recommended to upgrade to version 3.19.0, which fixes the issue. |
| Esri Portal for ArcGIS versions 12.1 and earlier on Windows, Linux and Kubernetes have a missing authentication for critical function vulnerability allows a remote, unauthenticated attacker to access an unprotected API. The following versions are known to be affected: Portal for ArcGIS 12.1 and earlier. Other unsupported versions may also be affected. Esri recommends that users apply the Portal for ArcGIS Security 2026 Update 2 Patch to remediate this vulnerability. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Use of Non-Canonical URL Paths for Authorization Decisions vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| A vulnerability in an API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass authentication.
This vulnerability is due to insufficient authentication control on an API endpoint. An attacker could exploit this vulnerability by sending a crafted request to an affected API endpoint. A successful exploit could allow the attacker to gain unauthorized access to the affected device by bypassing the web-based management interface. |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. In 4.14.0, AnyIO accepts the POSIX extra_groups argument in anyio.run_process() and anyio.open_process(), but open_process() forwards the group argument to the backend instead of extra_groups. A caller that supplies extra_groups=[] to clear inherited supplementary groups can therefore launch a child that retains the parent process groups, undermining a privilege-dropping boundary. If group is also supplied, the integer group value is passed where an iterable of supplementary groups is expected and the launch can fail with TypeError. This issue affects POSIX applications that rely on AnyIO subprocess helpers to launch less-privileged child processes. This issue is fixed in version 4.14.2. |
| Weak Password Recovery Mechanism for Forgotten Password vulnerability in Ankaref Innovation and Technology Inc. LIBRID/LIBREF allows Password Recovery Exploitation.
This issue affects LIBRID/LIBREF: from 2.01.0.2183 before 18.9.26.2319. |
| A vulnerability in Cisco ISE could allow an authenticated, remote attacker to obtain write access on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain write access to the underlying operating system.
To exploit this vulnerability, the attacker must have valid administrative credentials.
Note: For CVE-2026-20282, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that it is easy to get to root from the achieved privilege level. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 26.6.1. A website may be able to determine a user's IP address with Private Relay turned on. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 26.6.1. A website may be able to determine a user's IP address with Private Relay turned on. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap
bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap
flags, but a read-only mapping can still retain VM_MAYWRITE. nd later
be upgraded with mprotect(PROT_WRITE). This can bypass the write check
that only runs at mmap time.
Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page
branch, matching the existing policy that userspace writes are not
expected for these pages. |
| n8n before 2.32.1 (and before 2.31.5) is vulnerable to account takeover via the Token Exchange Embed Login feature. When a validly-signed incoming token was matched to a local account by its email claim, the service did not verify that the email claim was verified, nor that the trusted key's permitted role ceiling covered that account. As a result, anyone able to obtain a token accepted by a configured trusted key (for example, a trusted issuer emitting unverified email addresses) could authenticate as any existing user and gain full account control. This issue only affects instances where the embed login feature is enabled and at least one trusted key source is configured. |
