| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. |
| The OCI delta stream parser read sizes as guint64 but passed them to GLib I/O and allocation functions expecting gsize (32 bits on 32-bit systems), causing undersized allocations while subsequent operations use the original 64-bit size, leading to heap buffer overflows. An attacker controlling an OCI registry can craft a delta stream that triggers this during flatpak install/update, potentially achieving code execution on 32-bit systems. |
| FreeRDP before 3.32.0 contains a divide-by-zero vulnerability in the freerdp-shadow-cli shadow server: the frame id in a client's Frame Acknowledge PDU is stored without a range check, so the in-flight frame count in shadow_encoder_inflight_frames() can underflow. An authenticated client can acknowledge a frame id one greater than the last frame sent, causing shadow_encoder_create_frame_id() to divide by zero (SIGFPE) and terminate the process, disconnecting all viewers. |
| A flaw was found in GIMP's PNM file format parser. When parsing a specially crafted PNM file, the pnmscanner_gettoken() function writes a null terminator one byte past the end of a stack-allocated buffer due to an off-by-one error in the loop boundary check. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution. |
| A flaw was found in the file-fits plugin in GIMP. When processing a FITS image file, the plugin calculates memory allocation sizes using signed 32-bit integers for width and height. If a crafted file sets both values to large values, their product exceeds 2^31 and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when cfitsio subsequently writes a full row of pixels in the buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. |
| A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system. |
| A flaw was found in GIMP's PSD parser. An integer overflow in read_RLE_channel() can cause an undersized heap allocation for the RLE row-length table, after which subsequent per-row writes corrupt heap memory. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution. |
| Out-of-bounds read in the compact Theta sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
compact_theta_sketch::deserialize() and wrapped_compact_theta_sketch::wrap() read header fields before checking that the input was long enough. For the compressed format, the size check could be defeated by a 32-bit overflow, and two header fields that control decoding were not validated; this also affected deserialization from a stream. A crafted or truncated sketch could cause a read past the end of the input. In the compressed case the over-read can be large, and the bytes read can become part of the deserialized sketch. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 3.1.0 before 5.3.0. Only applications that deserialize Theta sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Out-of-bounds read in the VarOpt union deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
var_opt_union::deserialize() read the 32-byte preamble of a non-empty union after checking that only 8 bytes were available, so a truncated serialized union could cause a read of up to 24 bytes past the end of the input. For such inputs, the size remaining for the embedded sketch was also computed by an unsigned subtraction that could wrap around, so the embedded sketch's own size checks no longer limited reads to the input. The bytes read can become part of the deserialized union's state. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize VarOpt unions from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| ExtUtils::Typemaps::STL::Vector versions before 1.05 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion. |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion.
Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit
btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the
FRBD array access, allowing frbd_index == rxq->count to pass through
and index one element past the end of the array. Change the check to
>= rxq->count so every out-of-range index is rejected.
This issue was reported by Claude Mythos. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. In 2026.07 and earlier, the nanoCoAP client function nanocoap_sock_get_slice() in sys/net/application_layer/nanocoap/sock.c accepts a Block2 response when _block_cb() sees the expected block number without also verifying that the server-controlled szx and derived offset match the requested block geometry. A malicious CoAP server can return the expected block number with a larger block size, causing the derived offset to exceed the client slice offset and making ctx->offset - offset underflow in _2buf_slice(). The resulting buffer-relative calculation can read before the payload buffer and crash the client, causing denial of service and potentially exposing adjacent memory. No fixed release is available as of this review. |
| named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. |
| dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size, and for thread stack elements as STACK_ELEMENT_DATA_SIZE(size) (a round-up plus fixed overhead), without checking either expression for unsigned wrap-around. A size close to SIZE_MAX makes the computed total wrap to a very small value, so the heap chunk handed out is a few bytes while the object descriptor is still tagged with the full requested type and registered in the kernel object table.
The size argument reaches that arithmetic directly from user mode. k_object_alloc_size() is declared __syscall in include/zephyr/sys/kobject.h, its verifier z_vrfy_k_object_alloc_size() in kernel/userspace/userspace_handler.c is a bare pass-through, and z_object_alloc() only range-checks otype — nothing bounds size. The stack-element branch is additionally reachable through the k_thread_stack_alloc() syscall via kernel/dynamic.c. Because subsequent kernel-object validation checks only the object's type and initialization state, the undersized handle passes K_SYSCALL_OBJ_INIT()/K_SYSCALL_OBJ_NEVER_INIT(), and the matching init syscall (for example k_mutex_init(), k_sem_init(), or k_thread_create()) then writes a complete object over the truncated allocation.
An unprivileged user-mode thread can therefore trigger a supervisor-mode out-of-bounds write into the kernel resource-pool heap, of a size and content it substantially controls, corrupting sys_heap chunk metadata and adjacent kernel objects. Under CONFIG_GEN_PRIV_STACKS the thread-stack branch additionally stores an attacker-influenced wild pointer as a user thread's privileged stack base. The practical result is escape from the CONFIG_USERSPACE sandbox — kernel-level code execution or at minimum kernel memory corruption and system compromise.
Exploitation requires CONFIG_USERSPACE together with CONFIG_DYNAMIC_OBJECTS (also selected by CONFIG_DYNAMIC_THREAD under userspace), and a calling thread with an assigned resource pool. The fix rejects both overflowing computations and frees the partially built descriptor. |
| SumatraPDF is a multi-format reader for Windows. In 3.7.0.22298, LitParseHeader() in src/LitDoc.cpp computes the attacker-controlled hdrLen + nPieces * 16 section offset using signed 32-bit arithmetic without validating the complete result. When the component values make that aggregate calculation overflow to a negative value, pointer construction reaches an invalid read in LitU32(), causing deterministic application termination. The supplied evidence does not demonstrate code execution, information disclosure, arbitrary read, or integrity impact. No fixed version is available as of this review. |
| In display, there is a possible escalation of privilege due to an integer overflow. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11296678; Issue ID: MSV-9167. |
| libmikmod before 3.3.14 contains an integer overflow vulnerability in DSM_Load() in load_dsm.c that allows attackers to trigger heap buffer overflow via crafted track counts. Attackers can supply a DSM module whose numchn and numpat product wraps a 16-bit value, overwriting heap memory to cause crashes or potential code execution. |
| libmikmod before 3.3.14 contains an integer overflow in the Oktalyzer loader OKT_doPBOD() that allows attackers to cause heap buffer overflow via crafted track counts. Attackers can supply an OKT module whose SLEN chunk wraps the 16-bit numtrk value, causing PBOD writes past allocated track pointers for crashes or code execution. |
