| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog
da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(),
when the watchdog is left running by the driver sets
WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the
device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be
executed in da9063_wdt_suspend. In this case, the suspend callback is
a no-op and the watchdog keeps counting during system suspend,
leading to an unexpected system reset.
Check WDOG_HW_RUNNING and wdd，can fix this issue. |
| Use-after-free in the XML component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In Znuny through 7.3.6, an attacker can bypass specific standard login procedures and gain unauthorized access to sensitive system functions by manipulating a specific HTTP request header. Because the application incorrectly trusts this header, an attacker can impersonate any user, including administrators, without requiring a password. This grants full access to confidential data and system controls. More specifically, the HTTPBasicAuth modules for the agent (Kernel::System::Auth::HTTPBasicAuth) and customer (Kernel::System::CustomerAuth::HTTPBasicAuth) interfaces read the username to log in not only from $ENV{REMOTE_USER} (set by the web server after successful authentication), but also, as a fallback, from $ENV{HTTP_REMOTE_USER}, which is populated directly from an attacker-controllable "Remote-User" request header. On systems where HTTPBasicAuth was configured as the authentication backend, this allowed an attacker to log in as any existing user by sending a request with a forged Remote-User header, without providing any credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: avoid charging the root memcg from obj_cgroup_charge_pages()
obj_cgroup_charge_pages() resolves the objcg to its memcg and calls
try_charge_memcg(), which does not short circuit the root memcg. That
memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the
objcg was created for and is never updated, while memcg_reparent_objcgs()
does redirect objcg->memcg to the parent on rmdir. An objcg of a dying
child of root therefore passes every obj_cgroup_is_root() filter but
resolves to the root memcg.
Folios keep the objcg they were charged with, so this is easy to reach
through zswap: allocate anon memory in a cgroup, move the task out, remove
the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed
folios are charged through the reparented objcg and end up in
refill_stock() with the root memcg:
WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940
refill_stock+0x644/0x940
try_charge_memcg+0x12d6/0x1570
__obj_cgroup_charge+0x35/0xf0
obj_cgroup_charge+0x1de/0x210
obj_cgroup_charge_zswap+0x83/0x270
zswap_store+0x1620/0x2000
swap_writeout+0x94c/0x14c0
shrink_folio_list+0x3388/0x52b0
[...]
try_to_free_mem_cgroup_pages+0x30d/0x830
user_proactive_reclaim+0x504/0x840
memory_reclaim+0x1f/0x30
Beyond the warning, the charge is asymmetric: obj_cgroup_uncharge_pages()
skips refill_stock() for the root memcg, so the root's page counter grows
and is never uncharged. It is not user visible, since memory.current is
not exposed on the root, but it is a leak.
Use try_charge(), which returns early for the root memcg, restoring the
symmetry with obj_cgroup_uncharge_pages().
The above sequence was scripted into a standalone reproducer (zswap on,
swap on a virtio disk, 512MB of anon memory faulted in inside a child of
the root cgroup, the task then migrated to the root cgroup, the child
removed, followed by "echo 600M swappiness=max > memory.reclaim" on the
root) and run in a CONFIG_DEBUG_VM=y VM. It reproduces the splat on the
first zswap store of a reparented folio, with the same call chain as the
report. With this patch applied the splat is gone while the zswap store
count over the run is unchanged, so the same path is still exercised.
cgroup selftests test_zswap, test_kmem and test_memcontrol show no new
failures. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Avoid false migration warning for proxy donors
Proxy execution can move a blocked donor's scheduling context to the
lock owner's CPU even when the donor is migration-disabled. The donor
does not execute there, and its original execution CPU remains recorded
in wake_cpu.
set_task_cpu() warns unconditionally for migration-disabled tasks, so a
subsequent proxy migration or the wakeup path returning the donor home
triggers a false positive: moving a blocked scheduling context does not
violate the migration-disabled execution context.
For example, creating a mutex owner on CPU1 and a migration-disabled
waiter on CPU0 can trigger the following warning:
proxy_migrate_repro: donor blocking on CPU0 with migration disabled
proxy_migrate_repro: donor moved from CPU0 to CPU1
WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280
...
Call Trace:
try_to_wake_up+0x43f/0x780
__mutex_unlock_slowpath+0x330/0x540
owner_fn+0x9f/0xc0 [proxy_migrate_repro]
...
proxy_migrate_repro: donor woke on CPU0, task_cpu=0
proxy_migrate_repro: completed
Exclude blocked proxy donors from the warning. The proxy wakeup path
restores an executable placement before clearing the blocked state. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: follow SMB2 session expiration semantics
ksmbd_session_register() destroys valid sessions after ten seconds of
inactivity whenever a client starts another SessionSetup exchange. This
confuses Session.IdleTime with Session.ExpirationTime. Windows can create
additional authenticated sessions on an existing connection, so deleting
the older session invalidates its tree connects and makes mapped drives
fail with STATUS_NETWORK_NAME_DELETED.
The session expiration rules require the server to change a valid session
to expired only after its credential expiration time passes. A valid or
expired session otherwise keeps its connection from being scavenged.
Connections that have not negotiated a dialect, have no sessions, or have
only InProgress sessions are disconnected after an implementation-specific
timeout. Use the Windows-compatible 45 second value and run the expiration
check periodically for both TCP and SMB Direct.
Keep zero as an infinite credential expiration time, and count each
Valid-to-Expired transition. Set expired sessions to InProgress when they
reauthenticate. If authentication fails, remove the session from the
global and per-connection tables immediately, including SMB3 multichannel
connections.
Retain protection against abandoned SessionId-zero exchanges by allowing
only one InProgress authentication per connection. Additional exchanges
fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are
reaped after the same 45 second setup timeout. This bounds the original
unauthenticated memory-exhaustion path without evicting established
sessions. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: require a peer station for TDLS setup confirm
It's nonsense for the setup confirm to go to station that
doesn't even exist, and it hits a warning when building
the frame:
WARN_ON_ONCE(!sta || !ap_sta)
Only accept WLAN_TDLS_SETUP_CONFIRM when the station is
already there as a TDLS station. Need to copy the call
to ieee80211_tdls_prep_mgmt_packet() since the existing
WLAN_TDLS_DISCOVERY_REQUEST already falls through to it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't warn when an IBSS has no channel to scan
ieee80211_request_ibss_scan() warns when regulatory leaves no
allowed channel, but that can happen as the regdomain can change
while IBSS is operating, and it can continue to operate briefly
during the 60s grace period until it's shut down.
Just remove the warning in this case. |
| In DragonFly BSD through 6.4.2 before 4bb22ff, the ARP input handlers arpintr() and in_arpinput() (sys/netinet/if_ether.c) do not validate the hardware address length (ar_hln) and protocol address length (ar_pln) fields of incoming ARP packets. in_arpreply() then uses these attacker-controlled values as memcpy lengths when copying from kernel buffers that are only 6 and 4 bytes long, resulting in an out-of-bounds read of kernel heap and stack memory that is copied into the ARP reply sent back to the requester. An unauthenticated attacker on the adjacent network can use a single crafted ARP request to disclose up to roughly 250 bytes of each type of kernel memory, including kernel pointers. This is expected to be fixed in the 6.6 stable release when that is available. |
| Quarkus REST Data Panache provides a way to automatically generate REST endpoints for data entities. A flaw was found where certain endpoints do not properly check the sort parameter provided by users. This could allow an attacker to learn information they should not have access to or slow down the system by forcing the database to perform complex tasks, potentially causing a denial of service. |
| Thirty bees through 1.7.0 contains an authentication bypass vulnerability in PasswordController::resolveCustomer() that allows unauthenticated attackers to reset registered customers' passwords using guest account tokens. Attackers can place a guest order with the victim's email, then use the guest secure key to reset and take over the victim's account when guest checkout is enabled. |
| ZITADEL 3.0.0 before 4.18.0 contains a missing authentication vulnerability in the hosted Login V1 UI, where the change-username handler acts on the account bound to a login flow before any factor is verified. Unauthenticated attackers can submit a victim's login name and then post a new username to rename any active human user, including administrators, locking them out. |
| Heym v0.0.5 before v0.0.113 contains a broken access control vulnerability that allows former collaborators to keep executing JWT-auth workflows by reusing scoped workflow:execute tokens after share removal. Attackers can mint a token with a TTL up to 10 years, which the owner cannot list or revoke, and repeatedly run the workflow consuming shared credentials. |
| LibreNMS before 26.9.0 contains an LDAP filter injection in ldap-authorization and ad-authorization modes because usernames are inserted unescaped into LDAP search filters and authentication only checks user existence. When REMOTE_USER is not forwarded, unauthenticated attackers can send a wildcard username via HTTP Basic Authorization (PHP_AUTH_USER) to match all users and groups and gain admin access. |
| LibreNMS before 26.9.0 contains a stored cross-site scripting vulnerability in includes/html/pages/device/wireless.inc.php, which echoes wireless sensor sensor_descr values, populated from SNMP DisplayString fields during discovery, into HTML without escaping. Attackers controlling a monitored device's SNMP agent can set values such as AI-AP-MIB::aiSSID to malicious JavaScript that executes when authenticated users view the device's Wireless tab, enabling session hijacking. |
| Adminer before 6.1.1 contains a remote code execution vulnerability that allows authenticated SQLite users to bypass ATTACH and VACUUM INTO restrictions by prefixing statements with a UTF-8 byte-order mark. Attackers can attach a database file at a PHP-served path and create a table named with PHP code to execute it as the web server user. |
| SurrealDB from 3.0.0 before 3.3.0 contains a missing authentication vulnerability in the revoke RPC method that allows low-privileged or unauthenticated callers to invalidate other users' refresh tokens without proof of possession. Attackers can obtain grant identifiers via ACCESS SHOW ALL with VIEWER permission or leaked tokens, then permanently revoke refresh tokens to force re-authentication. |
| SurrealDB before 3.3.0 contains an authorization bypass vulnerability that allows record users to infer field values hidden by field-level SELECT permissions using LIVE SELECT WHERE predicates over $before or $after. Attackers can craft repeated predicates and observe whether notifications are delivered on CREATE, UPDATE, or DELETE to confirm or narrow restricted field values. |
| Network-AI (npm network-ai) before 5.15.2 contains an origin validation error in McpSseServer._handleRequest in lib/mcp-transport-sse.ts that reflects localhost Origins into Access-Control-Allow-Origin regardless of bind interface. When the server binds a non-loopback address, an attacker page with a localhost Origin visited by a victim can read unauthenticated endpoints like /health cross-origin. |
| Admidio 4.0.12 through 4.3.17 and 5.0.0 before 5.0.15 contains a reflected cross-site scripting vulnerability in system/redirect.php that allows unauthenticated attackers to inject JavaScript via the url GET parameter, due to an incomplete fix for CVE-2021-43810. Attackers can craft a javascript: URL containing a decoy http:// segment that passes validation and executes script in the Admidio origin when victims click the redirect link. |
