Export limit exceeded: 408757 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (52893 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53131 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: require Ethernet MAC header before using eth_hdr() `ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and `hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)` after either assuming that the skb is associated with an Ethernet device or checking only that the `ETH_HLEN` bytes at `skb_mac_header(skb)` lie between `skb->head` and `skb->data`. Make these paths first verify that the skb is associated with an Ethernet device, that the MAC header was set, and that it spans at least a full Ethernet header before accessing `eth_hdr(skb)`. | ||||
| CVE-2026-52999 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix out-of-bounds read on option matching In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once and passed by reference to nf_osf_match_one() for each fingerprint checked. During TCP option parsing, nf_osf_match_one() advances the shared ctx->optp pointer. If a fingerprint perfectly matches, the function returns early without restoring ctx->optp to its initial state. If the user has configured NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint. However, because ctx->optp was not restored, the next call to nf_osf_match_one() starts parsing from the end of the options buffer. This causes subsequent matches to read garbage data and fail immediately, making it impossible to log more than one match or logging incorrect matches. Instead of using a shared ctx->optp pointer, pass the context as a constant pointer and use a local pointer (optp) for TCP option traversal. This makes nf_osf_match_one() strictly stateless from the caller's perspective, ensuring every fingerprint check starts at the correct option offset. | ||||
| CVE-2026-52986 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. | ||||
| CVE-2026-52948 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong timeout value` warning was observed, accompanied by SMBus controller state machine corruption. The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of 10 ms. The user argument is checked against INT_MAX, but it is subsequently multiplied by 10 before being passed to msecs_to_jiffies(). A malicious user can pass a large value (e.g., 429496729) that passes the `arg > INT_MAX` check but overflows when multiplied by 10. This results in a truncated 32-bit unsigned value that bypasses the internal `(int)m < 0` check in `msecs_to_jiffies()`. The truncated value is then assigned to `client->adapter->timeout` (a signed 32-bit int), which is reinterpreted as a negative number. When passed to wait_for_completion_timeout(), this negative value undergoes sign extension to a 64-bit unsigned long, triggering the `schedule_timeout` warning and causing premature returns. This leaves the SMBus state machine in an unrecoverable state, constituting a local Denial of Service (DoS). Fix this by bounding the user argument to `INT_MAX / 10`. [wsa: move the comment as well] | ||||
| CVE-2026-52942 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: validate MAC header was set before dumping it The fallback path of dump_mac_header() guards the MAC header access only with "skb->mac_header != skb->network_header", without checking skb_mac_header_was_set(). When the MAC header is unset, mac_header is 0xffff, so the test passes and skb_mac_header(skb) returns skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads dev->hard_header_len bytes out of bounds into the kernel log. This is reachable via the netdev logger: nf_log_unknown_packet() calls dump_mac_header() unconditionally, and an skb sent through AF_PACKET with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still unset (__dev_queue_xmit(), which would reset it, is bypassed). Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already uses, and replace the open-coded MAC header length test with skb_mac_header_len(). Only skbs with an unset MAC header are affected; valid ones are dumped as before. BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831) Read of size 1 at addr ffff88800ea49d3f by task exploit/148 Call Trace: kasan_report (mm/kasan/report.c:595) dump_mac_header (net/netfilter/nf_log_syslog.c:831) nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963) nf_log_packet (net/netfilter/nf_log.c:260) nft_log_eval (net/netfilter/nft_log.c:60) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307) nf_hook_slow (net/netfilter/core.c:619) nf_hook_direct_egress (net/packet/af_packet.c:257) packet_xmit (net/packet/af_packet.c:280) packet_sendmsg (net/packet/af_packet.c:3114) __sys_sendto (net/socket.c:2265) | ||||
| CVE-2026-52933 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: fix signed comparison in io_poll_get_ownership() io_poll_get_ownership() uses a signed comparison to check whether poll_refs has reached the threshold for the slowpath: if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS)) atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG (BIT(31)) is set in poll_refs, the value becomes negative in signed arithmetic, so the >= 128 comparison always evaluates to false and the slowpath is never taken. Fix this by casting the atomic_read() result to unsigned int before the comparison, so that the cancel flag is treated as a large positive value and correctly triggers the slowpath. | ||||
| CVE-2026-52928 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Reject SIOCATMARK on non-stream sockets SIOCATMARK reports whether the receive queue is at the urgent mark for MSG_OOB. In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets. SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(), so they should not support SIOCATMARK either. Return -EOPNOTSUPP for non-stream sockets before checking the receive queue. | ||||
| CVE-2026-52917 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. | ||||
| CVE-2026-52910 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated--- | ||||
| CVE-2026-52909 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: set netns_immutable on the fallback device. john1988 and Noam Rathaus reported that vti6_init_net() does not set the netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0). Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel) correctly set this flag during their fallback device initialization to prevent them from being moved to another network namespace. | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-46323 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: don't merge zcopy skbs skb_gro_receive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFL_MANAGED_FRAG_REFS flag. When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF. When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs. | ||||
| CVE-2026-46307 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath5k: do not access array OOB Vincent reports: > The ath5k driver seems to do an array-index-out-of-bounds access as > shown by the UBSAN kernel message: > UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20 > index 4 is out of range for type 'ieee80211_tx_rate [4]' > ... > Call Trace: > <TASK> > dump_stack_lvl+0x5d/0x80 > ubsan_epilogue+0x5/0x2b > __ubsan_handle_out_of_bounds.cold+0x46/0x4b > ath5k_tasklet_tx+0x4e0/0x560 [ath5k] > tasklet_action_common+0xb5/0x1c0 It is real. 'ts->ts_final_idx' can be 3 on 5212, so: info->status.rates[ts->ts_final_idx + 1].idx = -1; with the array defined as: struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; while the size is: #define IEEE80211_TX_MAX_RATES 4 is indeed bogus. Set this 'idx = -1' sentinel only if the array index is less than the array size. As mac80211 will not look at rates beyond the size (IEEE80211_TX_MAX_RATES). Note: The effect of the OOB write is negligible. It just overwrites the next member of info->status, i.e. ack_signal. | ||||
| CVE-2026-46303 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: isofs: validate Rock Ridge CE continuation extent against volume size rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE record and passes it to sb_bread() without checking that the block number is within the mounted ISO 9660 volume. commit e595447e177b ("[PATCH] rock.c: handle corrupted directories") added cont_offset and cont_size rejection for the CE continuation but did not validate the extent block number itself. commit f54e18f1b831 ("isofs: Fix infinite looping over CE entries") later capped the CE chain length at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked. With a crafted ISO mounted via udisks2 (desktop optical auto-mount) or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at an out-of-range block or at blocks belonging to an adjacent filesystem on the same block device. sb_bread() on an out-of-range block returns NULL cleanly via the block layer EIO path, so there is no memory-safety violation. For in-range reads of adjacent- filesystem data, the CE buffer is parsed as Rock Ridge records and only the text of SL sub-records reaches userspace through readlink(), which makes the info-leak channel narrow and difficult to exploit; still, rejecting the malformed CE outright matches the rejection shape already present in the same function for cont_offset and cont_size. Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next to the existing offset/size rejection, printing the same corrupted-directory-entry notice. | ||||
| CVE-2026-46294 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix a buffer overflow in ioctl processing Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally | ||||
| CVE-2026-46234 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock: fix buffer size clamping order In vsock_update_buffer_size(), the buffer size was being clamped to the maximum first, and then to the minimum. If a user sets a minimum buffer size larger than the maximum, the minimum check overrides the maximum check, inverting the constraint. This breaks the intended socket memory boundaries by allowing the vsk->buffer_size to grow beyond the configured vsk->buffer_max_size. Fix this by checking the minimum first, and then the maximum. This ensures the buffer size never exceeds the buffer_max_size. | ||||
| CVE-2026-46209 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs() drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions using plain integer division: unsigned int width = mode_cmd->width / (i ? info->hsub : 1); unsigned int height = mode_cmd->height / (i ? info->vsub : 1); However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses drm_format_info_plane_width/height() which round up dimensions via DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object size check for certain pixel format and dimension combinations. For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the GEM size validation path sees height=0 instead of height=1. The expression (height - 1) then wraps to UINT_MAX as an unsigned int, causing min_size to overflow and wrap back to a small value. A tiny GEM object therefore passes the size guard, yet when the GPU accesses the chroma plane it will read or write memory beyond the object's bounds. Fix by replacing the open-coded divisions with drm_format_info_plane_width() and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match the calculation already used in framebuffer_check(). | ||||
| CVE-2026-46191 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: Avoid OOB font access if console rotation fails Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit message | ||||
| CVE-2026-46190 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array. | ||||
| CVE-2026-46185 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in symlink_data() Since smb2_check_message() returns success without length validation for the symlink error response, in symlink_data() it is possible for iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer only contains the base SMB2 header (64 bytes), accessing err->ErrorContextCount (at offset 66) or err->ByteCount later in symlink_data() will cause an out-of-bounds read. | ||||