| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read and write in lib_sag_ai_sound_sep_v2.00.so prior to SMR Oct-2026 Release 1 allows local attackers to read and write out-of-bounds memory. |
| Improper input validation in getting cover image in libsimba.heifdec.media.samsung.so prior to SMR Oct-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Out-of-bounds write in libcodec2-sec-flacdec.so prior to SMR Oct-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: percpu: Fix LSE operations on {8,16}-bit types
The assembly for __percpu_##name##_case_##sz() and
__percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro
argument to form the LSE instruction. Without 'sfx', a W register
argument will imply a 32-bit memory location, and consequently
{8,16}-bit ops will erroneously read and write 32 bits of memory when
the LSE instruction is used.
Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not
necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is
a register-register operation which does not access memory (and does not
take a size suffix). |
| Out-of-bounds read and write in the CPC sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
A crafted serialized CPC sketch passed to cpc_sketch::deserialize(), from either a byte buffer or a stream, can cause the decompressor to read past the end of the compressed data, because the read position was only checked after decoding finished. In the hybrid flavor, it can also cause a write outside an internal heap buffer, because decoded row indices were not validated. Several other header fields and decoded values, including lg_k, were also not validated. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize CPC sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity
data_ep_set_params() allocates each data URB for exactly u->packets
isochronous frames, so urb->iso_frame_desc[] has u->packets slots and
ctx->packets is the driver's only record of that limit. For an implicit
feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the
sync source's packet count, which is calculated independently from the
capture endpoint's parameters. When that count is larger,
prepare_playback_urb() and prepare_silent_urb() can write
iso_frame_desc[] past the allocation; their existing bounds limit payload
bytes, not the descriptor index.
The reproducer uses a high-speed UAC2 device declaring bInterval 1 for
implicit feedback capture (8 packets) and bInterval 4 for playback
(1 packet). On the first capture completion after the stream starts, it
accesses seven descriptors spanning 112 bytes beyond the one-packet URB:
BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560)
Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178
prepare_playback_urb (sound/usb/pcm.c:1560)
prepare_outbound_urb (sound/usb/endpoint.c:340)
snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501)
snd_complete_urb (sound/usb/endpoint.c:1834)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107)
kthread (kernel/kthread.c:436)
The buggy address belongs to the object at ffff88801e696a00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0)
Record the allocated packet count per endpoint and clamp both the adopted
count and the packet-size copy to it. Fold the Format Type II delimiter
into urb_packs before the allocation loop so the recorded limit matches
every URB. |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes the device data over the wrong page and leaves the intended one
stale, DMA_TO_DEVICE feeds the device from a page the mapping may not
cover. Partial syncs through dma_sync_single_range_for_*() are what make
tlb_offset non-zero.
The branch test is picked the same way, so a slot recorded in lowmem can
be adjusted into highmem and the lowmem path then hands a highmem
address to phys_to_virt().
Take both from orig_addr once it is final and keep pfn in the branch
that uses it. PhysHighMem() asks the question straight from the address,
as dma-debug already does. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 could allow an attacker with administrative privileges and access to the local management interface to execute arbitrary code due to an unbounded write to a fixed-size stack buffer. |
| heap OOB write in convert_file_from_to() via a crafted Content-Type header allows attacker to OOB write when email is used as a template. |
| The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets.
The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_BT_BAP_BROADCAST_SINK depends on CONFIG_BT_BAP_SCAN_DELEGATOR, so the path is active in every broadcast-sink build once the device is periodic-advertising-synced. An attacker in radio range who operates a broadcast source the device syncs to — or who impersonates the advertiser address and SID of one already in use, periodic advertising data being unauthenticated — can change the BASE at will; each new BASE is re-parsed.
A crafted BASE therefore writes attacker-chosen bytes past the end of a fixed static object in .bss: up to roughly 236 bytes for an oversized metadata LTV, plus whole struct bt_bap_bass_subgroup records for each subgroup beyond CONFIG_BT_BAP_BASS_MAX_SUBGROUPS. This is memory corruption of adjacent Bluetooth-audio state reachable with no pairing, bonding or GATT connection, with a potential for remote code execution in the Bluetooth RX thread; in addition, the unvalidated metadata_len is forwarded to bt_bap_scan_delegator_mod_src(), which neither clamps it nor rejects it, leading to a further copy into the receive state and to out-of-bounds memory being disclosed in the BASS receive-state notification sent to a connected Broadcast Assistant.
The fix rejects a BASE carrying more subgroups than the receive state can hold (discarding the update entirely) and omits metadata that does not fit rather than copying it, and additionally honours the previously-ignored error return of the subgroup decode pass. |
| In venc, there is a possible out of bounds write due to type confusion. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11383899; Issue ID: MSV-9606. |
| In meta, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11049530 / ALPS11480843; Issue ID: MSV-7935. |
| In mtee, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11383899; Issue ID: MSV-9607. |
| IBM Guardium Data Protection 12.0, 12.1 is vulnerable to a heap-based buffer overflow in the S-TAP TrafficTap TDS login reassembly functionality. An unauthenticated remote attacker can send crafted TDS login fragments that exceed the fixed-size reassembly buffer, potentially resulting in denial of service or arbitrary code execution on the affected system. |
| In vdec, there is a possible out of bounds write due to type confusion. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11383899; Issue ID: MSV-9800. |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in ntfs_ib_copy_tail(), in libntfs-3g/index.c, that allows an attacker to corrupt heap memory in the SUID-root ntfs-3g binary by crafting a malicious NTFS image. The overflow is triggered by extending a directory, e.g., by creating a file. |
| IBM Guardium Data Protection 12.0, 12.1, 12.2 is vulnerable to a heap-based buffer overflow in the MongoDB protocol parser. A remote attacker could send a specially crafted MongoDB SCRAM username containing an excessive length and cause memory corruption, potentially resulting in denial of service or arbitrary code execution. |
| In ccci, there is a possible out of bounds write and read due to a missing bounds check. This could lead to local information disclosure, memory corruption, crashes, or privilege escalation if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: ALPS11428950 (Note: For MT6880, MT6890) / ALPS10563453 (Note: For MT6980D, MT6990, MT6986, MT6986D, MT6813, MT6988) / AUTO00858766 (Note: For MT2735, MT2737); Issue ID: MSV-9893. |
| In battery, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11276677; Issue ID: MSV-9217. |
