| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tools/power/x86/intel-speed-select: Harden daemon pidfile open
Avoid symlink-based pidfile clobbering by opening the pidfile with
O_NOFOLLOW and validating it with fstat() before locking/writing.
The daemon currently uses a fixed pidfile path under /tmp. A local
unprivileged user can pre-create a symlink at that path and cause a
root-run daemon instance to write into an attacker-chosen file. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Add slave_destroy interface for v3 hw
WARNING is triggered when executing link reset of remote PHY and rmmod
SAS driver simultaneously. Following is the WARNING log:
WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
Call trace:
__device_links_no_driver+0xb4/0xc0
device_links_driver_cleanup+0xb0/0xfc
__device_release_driver+0x198/0x23c
device_release_driver+0x38/0x50
bus_remove_device+0x130/0x140
device_del+0x184/0x434
__scsi_remove_device+0x118/0x150
scsi_remove_target+0x1bc/0x240
sas_rphy_remove+0x90/0x94
sas_rphy_delete+0x24/0x3c
sas_destruct_devices+0x64/0xa0 [libsas]
sas_revalidate_domain+0xe4/0x150 [libsas]
process_one_work+0x1e0/0x46c
worker_thread+0x15c/0x464
kthread+0x160/0x170
ret_from_fork+0x10/0x20
---[ end trace 71e059eb58f85d4a ]---
During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
device_links_driver_bound, then this setting influences
__device_links_no_driver() before driver rmmod and caused WARNING.
Add the slave_destroy interface to make sure link is removed after flush
workque. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: guard against possible NULL deref in __in6_dev_stats_get()
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: fix unaligned memory access in timestamp adjustment
Use get_unaligned_be32() and put_unaligned_be32() to safely read and
write the timestamp fields. This prevents performance degradation due to
unaligned memory access or even a crash on strict alignment
architectures.
This follows the implementation of timestamp parsing in the networking
stack at tcp_parse_options() and synproxy_parse_options(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ]. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever fq_codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though fq_codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a recent
report [1] and a wild memory access in qfq:
[ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full)
[ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216
[ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000
[ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000
[ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024
[ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000
[ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578
[ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000
[ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0
[ 29.376103][ T360] PKRU: 55555554
[ 29.376258][ T360] Call Trace:
[ 29.376401][ T360] <TASK>
...
[ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057)
[ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored.
[1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Serialize readq reset state with q->lock
snd_seq_oss_readq_clear() resets qlen, head, and tail without
q->lock even though the normal reader and producer paths serialize the
same ring state under that spinlock. A reset can therefore race
snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave
stale records in the queue, drop freshly queued ones, or report the
wrong readiness after wakeup. KCSAN reports a data race between
snd_seq_oss_readq_clear() and snd_seq_oss_readq_free().
Take q->lock while clearing the ring and resetting input_time. Factor
the enqueue logic into a caller-locked helper so
snd_seq_oss_readq_put_timestamp() updates its suppression state under
the same lock instead of racing the reset path.
The buggy scenario involves two paths, with each column showing the
order within that path:
reset path: locked readq updater:
1. snd_seq_oss_reset() or 1. A reader or callback producer
release reaches takes q->lock on the same queue.
snd_seq_oss_readq_clear().
2. snd_seq_oss_readq_clear() 2. The updater tests or modifies
resets qlen, head, tail, qlen, head, and tail.
and input_time.
3. snd_seq_oss_readq_clear() 3. The updater completes its
wakes sleepers on read-modify-write sequence.
q->midi_sleep.
4. Without q->lock, the reset 4. The resulting ring state drives
can overlap the locked later reads and readiness.
update.
KCSAN reports:
BUG: KCSAN: data-race in snd_seq_oss_readq_clear /
snd_seq_oss_readq_free
write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0:
snd_seq_oss_readq_free+0x6c/0x80
snd_seq_oss_read+0xcb/0x250
odev_read+0x38/0x60
vfs_read+0xff/0x600
ksys_read+0xb4/0x140
__x64_sys_read+0x46/0x60
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1:
snd_seq_oss_readq_clear+0x1f/0x90
snd_seq_oss_reset+0xa7/0xf0
snd_seq_oss_ioctl+0x6f6/0x7e0
odev_ioctl+0x56/0xc0
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000001 -> 0x00000000 |
| In the Linux kernel, the following vulnerability has been resolved:
char: tlclk: fix use-after-free in tlclk_cleanup()
This patch improves the module cleanup process in the tlclk driver to
prevent potential use-after-free and race conditions.
Currently, the file_operations structure does not specify the .owner
field, which could allow the module to be unloaded while user-space
processes are still interacting with the device. Additionally, the
tlclk_cleanup() function frees the alarm_events memory before ensuring
that blocked processes in the waitqueue are fully awakened and that the
switchover_timer has completed.
To address these cases, this patch:
- Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module
unloading while the device is in use.
- Updates tlclk_cleanup() to explicitly wake up all blocked readers
(wake_up_all), properly release hardware I/O regions, and safely
delete the timer (timer_delete_sync) prior to freeing memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone
kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the
structure to the options_len, which is then initialized to zero.
Later, we're initializing the structure by copying the tunnel info
together with the options, and this triggers a warning for a potential
memcpy overflow, since the compiler estimates that the options can't
fit into the structure, even though the memory for them is actually
allocated.
memcpy: detected buffer overflow: 104 byte write of buffer size 96
WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report
skb_tunnel_info_unclone+0x179/0x190
geneve_xmit+0x7fe/0xe00
The issue is triggered when built with clang and source fortification.
Fix that by doing the copy in two stages: first - the main data with
the options_len, then the options. This way the correct length should
be known at the time of the copy.
It would be better if the options_len never changed after allocation,
but the allocation code is a little separate from the initialization
and it would be awkward and potentially dangerous to return a struct
with options_len set to a non-zero value from the metadata_dst_alloc().
Another option would be to use ip_tunnel_info_opts_set(), but it is
doing too many unnecessary operations for the use case here. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix NAPI leak in XDP enable error path
During XDP enablement in veth, if xdp_rxq_info_reg() or
xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes.
However, the rollback loop:
for (i--; i >= start; i--) {
decrements the loop index 'i' before the first iteration. This
correctly skips unregistering the rxq for the failed index 'i' (as
registration failed or was already cleaned up), but it also
erroneously skips calling netif_napi_deli() for rq[i].xdp_napi.
Since netif_napi_add() was already called for index 'i', this leaves
a dangling napi_struct in the device's napi_list. When the veth
device is later destroyed, the freed queue memory (which contains the
leaked NAPI structure) can be reused.
The subsequent device teardown iterates the NAPI list and
corrupts the reallocated memory, leading to UAF.
Fix this by explicitly deleting the NAPI association for the failed
index 'i' before rolling back the successfully configured queues. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix out-of-bounds check for cqe->len_list[]
Move index check before element access. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \
drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper]
Call Trace:
xe_vma_userptr_do_inval+0x40d/0xfd0 [xe]
xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe]
xe_vma_userptr_force_invalidate+0xde/0x290 [xe]
vma_check_userptr.constprop.0+0x1c6/0x220 [xe]
xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe]
...
xe_vm_bind_ioctl+0x3a0a/0x4480 [xe]
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
(cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix OOB read in hid_get_report for numbered reports
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.
Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.
Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at least 1 before
dereferencing the data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it contains an ASCII digit, simple_strtoul
will consume it and produce a wrong DCC IP or port in the conntrack
expectation. The extra allocation byte is also a fragile guard: if the
cap or allocation size changes, this becomes a real out-of-bounds read.
Change the loop and its post-loop check to use strict less-than,
consistent with the caller's exclusive-end convention. Update the
function comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: gw: acquire ethernet header only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in decompress_lznt
decompress_lznt() does not validate array index bounds before accessing
the decompression table. A corrupted NTFS3 image with invalid compressed
data can trigger an out-of-bounds read.
Add index bounds checking to prevent the OOB access. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_atk0110) Check package count before accessing element
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package.count check first. Add the same
check to atk_ec_present() so a malformed firmware package cannot trigger
an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged. |
| In the Linux kernel, the following vulnerability has been resolved:
block: stop the timeout timer when releasing a never added disk
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to stop it. __del_gendisk() and
blk_mq_destroy_queue() still do; only the probe failure path lost it.
nvme gets there because nvme_update_ns_info() submits Report Zones or
FDP io-mgmt-recv on ns->queue before the disk is added, so a later
failure - a concurrent reset setting NVME_CTRL_FROZEN, or
device_add_disk() failing - lands in put_disk() with the timer armed:
BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340
Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37
__timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621
blk_sync_queue+0x22/0x40 block/blk-core.c:222
nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362
nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264
Allocated by task 34:
__blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462
nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146
Freed by task 0:
blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254
rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857
The queue being synced there is ctrl->admin_q, only a victim sharing a
timer wheel bucket with the freed queue's dangling entry; other runs
tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work().
Failing nvme_alloc_ns() with a debug patch makes it deterministic: one
leaked timer trips KASAN within seconds, while 1987 patched releases
produced no splat.
Stop the timer and the queue work items before blk_mq_exit_queue(), like
blk_mq_destroy_queue() does.
Found by FuzzNvme. |
