| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.27.0 until 2.131.0, Docling plugin factories in docling/models/factories/base_factory.py call load_setuptools_entrypoints() before applying the allow_external_plugins setting, so every module registered in the Docling entry-point group is imported even when external plugins are disabled. An installed third-party or compromised package can therefore execute import-time code when Docling starts, while the subsequent namespace filter misleadingly reports that the plugin was not loaded. This issue is fixed in 2.131.0. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, when ImageMagick is built without Cairo support, a crafted RSVG image that reaches a resource limit can cause the RSVG decoder to free image state twice and then use freed memory, crashing the process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds
rxe_get_mcg() publishes a newly allocated multicast group in
rxe->mcg_tree before programming the backing Ethernet multicast address
with rxe_mcast_add(), which runs outside mcg_lock. A local userspace
RDMA client reaches this path with ATTACH_MCAST on a UD QP; if
rxe_mcast_add() then returns an error (for example -ENODEV when the
backing netdev has been removed, or a propagated dev_mc_add() error),
the unwind frees the published group without removing it from the tree.
A later lookup of the same MGID dereferences the freed struct rxe_mcg
from __rxe_lookup_mcg().
Fix this by keeping the new mcg private until rxe_mcast_add() succeeds.
Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add()
before taking the tree reference, and free the still-private mcg on
failure. Because the group is never visible in mcg_tree until the
multicast address is programmed, no concurrent caller can look it up or
attach a QP to a group that is about to be torn down, so the error path
needs no conditional unwind. If another caller publishes the same MGID
while the address is being programmed, the post-add re-check under
mcg_lock finds the winner; this caller then drops its private object and
balances its own rxe_mcast_add() with rxe_mcast_del() before returning
the winner.
Reproduced by forcing the rxe_mcast_add() error return under KASAN:
without the change the next attach to the same MGID reports a
slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure
returns cleanly. A no-injection attach/detach regression, including a
two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. |
| A flaw was found in kube-compare. When processing a 'container://' reference path, the tool incorrectly executes an untrusted container image's entrypoint instead of merely extracting data from a stopped container. This allows a remote attacker to achieve arbitrary code execution on the operator's workstation. If the Docker daemon requires elevated privileges, the untrusted code may execute with root-mediated daemon privileges, posing a significant security risk. |
| In handle_le_monitor_device_event of msft.cc, there is a possible control-flow hijack in the privileged bluetooth process due to an uninitialized pointer dereference. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject()
syzbot reported a suspicious RCU usage warning in ip6_pkt_drop():
WARNING: suspicious RCU usage in ip6_pkt_drop
include/net/addrconf.h:389 suspicious rcu_dereference_check() usage!
Call Trace:
__in6_dev_get_safely include/net/addrconf.h:389 [inline]
ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620
ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651
xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486
When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through
workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue,
the reinjection loop ceased running in softirq context. Workqueue workers
run in process context where local_bh_disable() does not enter an RCU
read-side critical section under CONFIG_PREEMPT_RCU.
Because finish callbacks (such as ip6_rcv_finish) expect to run under an
RCU read lock (performing route lookups, l3mdev lookups, and accessing
RCU-protected data structures), invoking them in workqueue context without
rcu_read_lock() triggers RCU lockdep warnings.
Furthermore, packets queued to the workqueue via xfrm_trans_queue_net()
may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref).
Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev
with blackhole_netdev, so dst entries do not keep skb->dev alive while
queued in the workqueue.
Fix these issues by:
1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the
caller's RCU section to ensure dst is reference-counted before queuing.
2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue
deferral so skb->dev remains valid during finish() callback processing.
3. Acquiring rcu_read_lock() around the finish callback invocation loop in
xfrm_trans_reinject(). |
| A flaw was found in the X.Org Server. When a window is removed during an active gesture, the server fails to clean up references to the destroyed window in its gesture tracking data. A local attacker can exploit this flaw to cause a use-after-free condition—where the system accesses memory after it has been released—potentially leading to unauthorized information disclosure or a denial of service (DoS). |
| A flaw was found in xorg-x11-server. A use-after-free vulnerability, where the application accesses memory after it has already been released, occurs in the Present extension because window notification entries are not properly unlinked before cleaning up window resources. An authenticated local X client can exploit this flaw by creating cross-window notifications and subsequently destroying the target window. Successful exploitation primarily results in a Denial of Service (DoS) via an X server crash, and may potentially lead to information disclosure. |
| A flaw was found in xorg-x11-server. A local user can exploit a use-after-free condition—where the software attempts to access memory after it has been freed—by establishing a passive input grab and removing an input device. When subsequent input events are processed, the server dereferences the dangling device pointer. This flaw can lead to arbitrary code execution or a Denial of Service (DoS) via an X server crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring entries keep
their old buffer size until they are replenished.
A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer
packet produced a one-byte KASAN use-after-free write before this change.
The same test passed after the change. The driver object also builds
with W=1. This was not tested on physical LAN743x hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
reconnect.
Signal the channel and the primary server and capture the primary
server pointer before dropping the channel reference with
cifs_put_tcp_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3
The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference"
changed the check to test for the ops pointer instead of the signaled
bit to avoid a potential NULL dereference when the ops pointer has been
cleared.
The problem is now that the ops pointer is cleared only when neither the
release nor the wait callback is implemented and this isn't true for a lot
of dma_fence implementations yet. So those implementations lost the RCU
protection after signaling of the returned string resulting in potential
use after free.
Add the signaling check additional to the ops pointer check so that we
have both the protection against NULL dereference as well as the RCU
protection after signaling for the returned string.
v2: improve comments to note RCU protection and explain why we check
both signaling state and ops pointer
v3: some comment improvements suggested by Philip |
| In the Linux kernel, the following vulnerability has been resolved:
signal: Prevent exec() race
Hyunwoo debugged the following KASAN UAF splat:
BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0
Write of size 8 at addr ffff888007ed80c8 by task poc/79
...
Call Trace:
__send_signal_locked+0xb27/0xba0
do_send_sig_info+0xa7/0x160
do_send_specific+0x76/0xa0
__x64_sys_tgkill+0x193/0x270
...
Allocated by task 80:
do_timer_create+0x1a4/0x1030
__x64_sys_timer_create+0x145/0x190
...
Freed by task 12:
kmem_cache_free_bulk+0x1f8/0x4a0
kvfree_rcu_bulk+0x14f/0x1c0
kfree_rcu_work+0x128/0x1a0
...
Last potentially related work creation:
kvfree_call_rcu+0x39/0x390
__flush_itimer_signals+0x211/0x320
flush_itimer_signals+0x47/0x90
begin_new_exec+0xa6b/0x28c0
It turned out that this happens with a non-leader exec() as Hyunwoo
explained:
de_thread() calls exchange_tids() before release_task(leader), so the
struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid
now points to the thread which called execve(). pid_task() returns that
thread and lock_task_sighand() on it succeeds.
If the timer signal is blocked, its sigqueue stays queued on the leader's
task::pending. The next expiry of that timer can then run while
release_task() flushes the queue.
posixtimer_send_sigqueue() checks whether the sigqueue is already queued
with a plain list_empty(), which only reads list_head::next.
list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next
before list_head::prev, so the check can pass in between. list_add_tail()
queues the entry on the task::pending of the live thread, and the
list_head::prev store from the flush then overwrites the list_head::prev
link that list_add_tail() has just set.
__flush_itimer_signals() does not undo that either. With list_head::prev
pointing at the entry itself, its list_del_init() only stores the same
values again, so the entry is not removed from the list. It is still there
after the last reference is dropped and the timer is freed by RCU, and the
list_add_tail() of a later tgkill() follows that list_head::prev into the
freed timer.
This problem surfaced with the recent commit which moved the sigqueue flush
out of the sighand lock held region.
Hyonwoo proposed to fix this by using list_del_init_careful(), but that
just papers over the problem. After some disucssions and various attempts
to solve it, Eric pointed out that there is no reason to flush
task::pending late in release_task() and it should be done in
exit_signals() already.
As nothing can collect and deliver signals which are queued in a dying
task's pending queue, there is no reason to delay it further.
But it has to be ensured that no signals can be queued into it after that
point. exit_signals() sets PF_EXITING in task::flags, which can be used as
an indicator for this.
Cure it by:
- Preventing signal queueing for task private signals (PIDTYPE_PID) when
the task has PF_EXITING set in __send_signal_locked() and in
posixtimer_send_sigqueue().
- Protecting the unlocked setting of PF_EXITING in exit_signals() for the
task group empty and the group exit case with sighand lock
- Flushing task::pending signals right there.
Optimize that by moving the whole pending list to an on-stack list head
under sighand lock and free the signals without the lock held.
There has been quite some discussion about the lockless flush and the
non-leader exec case on weakly ordered systems. The problem is that a third
party which tries to send a posix timer signal relies on the PID lookup to
find the target task and that lookup might result in the new leader when
the signal was originaly directed to the old leader. In case that the
signal was queued on the old leader then the lockless flush raised a
concern over the following situation:
old_leader new_leader third party
A: flush_list() // list_del_in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: hold reference on ct until flow is released
nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe
semantics also allow to refer to the wrong conntrack from the flowtable
datapath. Hold reference on ct until flow is released after rcu grace
period.
Add rcu_barrier() on module exit path, to ensure pending flow entries
are release before module goes away. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Serialize local codec list cleanup
hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock.
Codec list additions and both traversals in sco_sock_getsockopt() use that
lock, but the close path does not. A close and BT_CODEC query can therefore
interleave as follows:
hci_dev_close_sync() sco_sock_getsockopt()
hci_dev_lock()
fetch codec entry
hci_codec_list_clear()
kfree(entry)
read entry->id
The reader then accesses an entry which the close path has freed. KASAN
BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0
Read of size 1 at addr ffff8881001c3450
Call Trace:
sco_sock_getsockopt+0xfa0/0xfe0
do_sock_getsockopt+0x537/0x7b0
__sys_getsockopt+0xf2/0x170
Allocated by task 92:
hci_codec_list_add.isra.0+0x2c/0x440
hci_read_codec_capabilities+0x224/0x590
hci_read_supported_codecs+0x2c2/0x640
Freed by task 92:
kfree+0x131/0x3c0
hci_codec_list_clear+0xd8/0x160
hci_dev_close_sync+0x92a/0xfa0
Take hdev->lock around the clear operation at its existing point in the
close path. This makes the clear wait for active readers and prevents a new
traversal until the list is empty without changing teardown ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final drop callback reports the current
state's protocol.
If secpath_reset() drops the last state reference while the state is
concurrently deleted, xfrm_input() can still dereference the freed state
when selecting transport_finish() or reporting the drop callback protocol.
Save the state protocol on the stack while the state is still valid,
and use the already saved address family for transport_finish(). A larval
XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This
preserves the existing drop-path fallback while avoiding the post-reset
state dereferences without adding an extra state reference to every
received packet. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
