| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When the password reset functionality is enabled, and email is configured, an attacker could take over any account using a brute-force attack.
There is no rate limiting on the attempts to enter the reset code, leading to the possibility of a brute force solution to the password reset challenge.
An attacker could gain administrative access to the application and perform actions like configuring the service or requesting log collection. Device credentials and customer data cannot be accessed with this vulnerability. |
| A weakness has been identified in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. The affected element is an unknown function of the file dbtables.sql. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member.
When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected.
hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3.
This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to stdlib from 8.0 before 8.1.1, and rebar3 from 3.27.1 onward, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1. |
| Sure 0.7.0 through 0.7.6-alpha.6 contains a missing authorization vulnerability in Transactions::BulkUpdatesController#create that allows family members to bypass account sharing permissions. Authenticated members with read_only or no share can submit arbitrary entry_ids to modify other members' transaction dates, names, notes, categories, merchants and tags, corrupting budgets and reports. |
| A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation.
Flaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered.
We recommend upgrading past commit 4bedf9eee016286c835e3d8fa981ddece5338795. |
| A use-after-free vulnerability in the Linux kernel's net/sched: cls_u32 component can be exploited to achieve local privilege escalation.
If tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.
We recommend upgrading past commit 04c55383fa5689357bcdd2c8036725a55ed632bc. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. One of those
checks confirms that the modulus ('p' parameter) is not too large. Trying to use
a very large modulus is slow and OpenSSL will not normally use a modulus which
is over 10,000 bits in length.
However the DH_check() function checks numerous aspects of the key or parameters
that have been supplied. Some of those checks use the supplied modulus value
even if it has already been found to be too large.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulernable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the '-check' option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation.
Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer.
We recommend upgrading past commit ef7dfac51d8ed961b742218f526bd589f3900a59 (4716c73b188566865bdd79c3a6709696a224ac04 for 5.10 stable and 0e388fce7aec40992eadee654193cad345d62663 for 5.15 stable). |
| A null pointer dereference flaw was found in the Linux kernel's DECnet networking protocol. This issue could allow a remote user to crash the system. |
| An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information. |
| A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic. |
| A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak. |
| A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function. |
| There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem. |
| Issue summary: Processing some specially crafted ASN.1 object identifiers or
data containing them may be very slow.
Impact summary: Applications that use OBJ_obj2txt() directly, or use any of
the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message
size limit may experience notable to very long delays when processing those
messages, which may lead to a Denial of Service.
An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers -
most of which have no size limit. OBJ_obj2txt() may be used to translate
an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL
type ASN1_OBJECT) to its canonical numeric text form, which are the
sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by
periods.
When one of the sub-identifiers in the OBJECT IDENTIFIER is very large
(these are sizes that are seen as absurdly large, taking up tens or hundreds
of KiBs), the translation to a decimal number in text may take a very long
time. The time complexity is O(n^2) with 'n' being the size of the
sub-identifiers in bytes (*).
With OpenSSL 3.0, support to fetch cryptographic algorithms using names /
identifiers in string form was introduced. This includes using OBJECT
IDENTIFIERs in canonical numeric text form as identifiers for fetching
algorithms.
Such OBJECT IDENTIFIERs may be received through the ASN.1 structure
AlgorithmIdentifier, which is commonly used in multiple protocols to specify
what cryptographic algorithm should be used to sign or verify, encrypt or
decrypt, or digest passed data.
Applications that call OBJ_obj2txt() directly with untrusted data are
affected, with any version of OpenSSL. If the use is for the mere purpose
of display, the severity is considered low.
In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME,
CMS, CMP/CRMF or TS. It also impacts anything that processes X.509
certificates, including simple things like verifying its signature.
The impact on TLS is relatively low, because all versions of OpenSSL have a
100KiB limit on the peer's certificate chain. Additionally, this only
impacts clients, or servers that have explicitly enabled client
authentication.
In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects,
such as X.509 certificates. This is assumed to not happen in such a way
that it would cause a Denial of Service, so these versions are considered
not affected by this issue in such a way that it would be cause for concern,
and the severity is therefore considered low. |
| A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel’s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%. |
| In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference. |
| In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption. |
| A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It's basically trusted input or input that needs an actual security flaw to be compromised or controlled. |
| A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 ("net: sched: fix race condition in qdisc_graft()") not applied yet, then kernel could be affected. |
